ShopVac Super K11-SQ14: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) m (Blank line at the top) |
NitramLegov (talk | contribs) m (→ShopVac Super K11-SQ14: Add assetid) |
||
| Line 7: | Line 7: | ||
|type=Shop Vac | |type=Shop Vac | ||
|location=[[Location::CNC Area|CNC area]] | |location=[[Location::CNC Area|CNC area]] | ||
|material=dry dirt in its usual setup,<br>'''wet dirt only with special bag''' | |assetid=22|material=dry dirt in its usual setup,<br>'''wet dirt only with special bag''' | ||
}} | }} | ||
Our small shop vac is '''not equipped with a fine filter and therefore unsuitable for harmful dust'''. It is quite okay for "normal" cleaning tasks, though. | Our small shop vac is '''not equipped with a fine filter and therefore unsuitable for harmful dust'''. It is quite okay for "normal" cleaning tasks, though. | ||
Revision as of 13:54, 5 November 2022
ShopVac Super K11-SQ14
| MachineInfoBox ShopVac Super K11-SQ14 | |
|---|---|
| |
| Synonyms: | "Pikachu"; Shop Vac Nass-Trockensauger Super 16 |
| Type: | Dust Extractors |
| Material: | dry dirt in its usual setup, wet dirt only with special bag |
| Location: | CNC Area |
| Access Requirements: | Read the Wiki Page |
| Status: | Working |
| Tutors: | |
Our small shop vac is not equipped with a fine filter and therefore unsuitable for harmful dust. It is quite okay for "normal" cleaning tasks, though.
Therefore, it is attached to the cyclone seperator for our CNC Router and should only be used for that.
Consumables
- bags: 16 L (4 gallons), e.g. these from Bauhaus
Compatible Tools
already compatible:
- CNC router (see #15)
not tested/adapters needed:
