Wood Lathes: Difference between revisions
(→Güde 1000: removed commissioning template) |
m (moved Table of Contents to top) |
||
| Line 11: | Line 11: | ||
|similar=[[Metal Lathe|metal lathe]] | |similar=[[Metal Lathe|metal lathe]] | ||
}} | }} | ||
__TOC__ | |||
We have wood lathes in the [[Wood Workshop|wood workshop]] that we can use as an entry to [[woodturning]] - if a community of turning enthusiasts develops and the machines becomes too weak for more ambitious projects, we'll have to think about replacing them with a professional model. | We have wood lathes in the [[Wood Workshop|wood workshop]] that we can use as an entry to [[woodturning]] - if a community of turning enthusiasts develops and the machines becomes too weak for more ambitious projects, we'll have to think about replacing them with a professional model. | ||
Revision as of 20:09, 27 January 2019
| MachineInfoBox Wood Lathes | |
|---|---|
| |
| Synonyms: | woodturning lathes; DE: Drechselbänke, Drechselmaschinen |
| Material: | woodturning blanks |
| Used with: | face shield, woodturning tools |
| Access Requirements: | Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Tutors: | LukasThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Similar (More or Less): | metal lathe |
[[Has caption::lathe| ]]
We have wood lathes in the wood workshop that we can use as an entry to woodturning - if a community of turning enthusiasts develops and the machines becomes too weak for more ambitious projects, we'll have to think about replacing them with a professional model.
Güde 1000
| MachineInfoBox Güde 1000 | |
|---|---|
| |
| Material: | woodturning blanks |
| Used with: | face shield, woodturning tools |
| Access Requirements: | Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Manual: | Guede.com |
| Tutors: | LukasThe part "]]" of the query was not understood.</br>Results might not be as expected. |
[[Has caption::lathe| ]]
The "Güde" wood lathe is very simple, but okay for learning how to turn wood.
Specs
- max. workpiece diameter: 320 mm
- max. workpiece length: 1000 mm
- spindle speeds: 850 - 1250 - 1750 - 2510 rpm
- motor: 370 W
- spindle thread: M18
- workholding options: drive center (Vielzack-Stirnmitnehmer/"Dornenkrone"),
four-jaw chuck, faceplate(wrong thread)
Speed Selection
The lathe can run at various speeds depending on which pulleys are connected by the belt (picture on the housing). Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!
Upgrades/Improvements
We should soon tweak this machine to improve usability (also see issue #7) :
- replace pulley adjustment and casing screws by thumbwheels or so
- add a clamping lever to the tool rest's nut
buy (or turn on the metal lathe) an 18 to 33 mm adapter (to match common accessories like faceplates)buy (or make) a faceplateMicha brought in enough accessories for the start :-)
Holzmann D 460F
| MachineInfoBox Holzmann D 460F | |
|---|---|
| |
| Material: | woodturning blanks |
| Used with: | face shield, woodturning tools |
| Access Requirements: | Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Manual: | maschinenhandel-gronau.de (DE) |
| Tutors: | LukasThe part "]]" of the query was not understood.</br>Results might not be as expected. |
[[Has caption::lathe| ]]
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | Holzmann D 460F | Done |
| Take a picture | - | Done |
| Find the manual as PDF | only DE | done |
| Documentation | more info welcome of course.. | good enough as a start |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | Woodturning Introduction | done |
| Security Check | swiveling control box may be dangerous => included a safety note below | done |
| Test | to be done or witnessed by a manager | done |
| tool's name, owner and approx. value | Lukas | done |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
We have got another wood lathe, which needs some documentation before it can actually be used.
SAFETY NOTE: Make sure you familiarize yourself with the on/off switch before use! The control box swivels and can move away from you if you push the button, be prepared for that!
Specs
- max. workpiece diameter: 254 mm
- max. workpiece length: 450 mm
- spindle speeds: 650-3800 rpm (variable)
- motor: 370 W
- spindle thread: M33
- workholding options:
- headstock: four-jaw chuck
- tailstock: morse taper - accessories: rotating center, drill chuck
Speed Selection
The D 460F has an electronic speed selection which is regulated by a potentiometer (without scale!) above the on/off switch.
Upgrades/Improvements
Ideas:
- it would be nice to fix the control box more properly - this should be coordinated with Micha Ba. who is the machine's owner!
- get/make a faceplate and a drive center for more workholding flexibility
