Project:Lockers: Difference between revisions

From CoMakingSpace Wiki

(→‎Latch Hardware: linked alternative lock option from Makezine)
(notes on "vertical approach" construction)
Line 6: Line 6:
|initiator={{£}}, [[Ciaran]], [[Patrick]], [[Mitja]]
|initiator={{£}}, [[Ciaran]], [[Patrick]], [[Mitja]]
|team=Ed
|team=Ed
|materials=[[plywood]] ("Elliotis pine"), [[Wood Screws|wood screws]], [[Piano Hinges|piano hinges]], [[brackets]]
|materials=[[plywood]] ("Elliotis pine"), [[Wood Screws|wood screws]],<br>[[Piano Hinges|piano hinges]], [[brackets]]
|tools=[[Circular Saw|circular saw]], [[Table Saw|table saw]], [[Smoothing Plane|smoothing plane]],<br>[[sandpaper]], [[Cordless Drill|cordless drill]]
|tools=[[Circular Saw|circular saw]], [[Table Saw|table saw]], [[Smoothing Plane|smoothing plane]],<br>[[sandpaper]], [[Cordless Drill|cordless drill]]
|software=[[SketchUp]]
|software=[[SketchUp]]
Line 26: Line 26:
* cleats holding the floors waste a bit of space
* cleats holding the floors waste a bit of space
* floors need to be secured from top and bottom to avoid tampering
* floors need to be secured from top and bottom to avoid tampering
=== Notes on Construction ===
The doors should be hung once everything else is in place as the long boards used tend to shift throughout the build. It also turned out that calculated sizes do not always work out as the thickness of the plywood sheets varies by up to 2 mm.


<br clear=left>
<br clear=left>

Revision as of 09:04, 6 October 2017

ProjectInfoBox

building lockers for our members

Sketching lockers.PNG
Status: in progress
Release Date: Oct 2017
Initiator: Lukas, Ciaran, Patrick, Mitja
Team: Ed
Materials Used: plywood ("Elliotis pine"), wood screws,
piano hinges, brackets
Tools Used: circular saw, table saw, smoothing plane,
sandpaper, cordless drill
Software Used: SketchUp


We are building a bunch of lockers for our common room!

Vertical Approach

three lockers across, two up for a total of six per unit

The first prototype consisted of six lockers arranged in a 3 × 2 pattern, all in one frame.

pro:

  • few individual boards
  • pretty close to the minimum amount of wood needed for lockers this size

con:

  • large boards to handle
  • large contraption, difficult to transport later on
  • cleats holding the floors waste a bit of space
  • floors need to be secured from top and bottom to avoid tampering

Notes on Construction

The doors should be hung once everything else is in place as the long boards used tend to shift throughout the build. It also turned out that calculated sizes do not always work out as the thickness of the plywood sheets varies by up to 2 mm.


Horizontal Approach

two horizontal boxes make up each six locker unit in this scenario

Ciaran proposed an alternative design during the making of the first "vertical" prototype which will be the second one we try.

pro:

  • smaller individual boards
  • smaller units - easier to move to a new location one day
  • no space lost with cleats

con:

  • more pieces to assemble
  • "double floor" requires more wood and wastes more space than cleats would


Latch Hardware

Locking is possible by connecting the holes of a bracket and a matching piece of flat steel, e.g. with a padlock. Members can of course get creative and operate their locker with any number of over-engineered fancy setups ;-)