Sheet Sanders: Difference between revisions

Revision as of 23:05, 20 October 2022

MachineInfoBox Sheet Sanders

Synonyms:	orbital finishing sanders; DE: Schwingschleifer, Rutscher
Material:	depends on sanding sheet (usually wood)
Used with:	sandpaper
Access Requirements:	Handheld Sander Introduction
Tutors:	Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob
Similar (More or Less):	eccentric and other power sanders

Sheet sanders have a square orbiting pad that lets you reach into corners and remove a similar amount of material as eccentric sanders. Because they lack the additional turning motion though, they are more prone to leaving sanding marks on your workpiece if you're not careful.

Bosch PSS 250 AE

MachineInfoBox Bosch PSS 250 AE

Type:	Sheet Sanders
Used with:	sandpaper - 93 × 185 mm (hook and loop) or 93 × 230 mm (plain, clamped)
Location:	Sanding Area
Access Requirements:	Handheld Sander Introduction
Status:	Working
Manual:	ManualsLib
Tutors:	Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob

The Bosch PSS 250 AE can be used with hook-and-loop sandpaper strips, but regular ones can also be clamped in.

It has a "microfilter" that reduces airborne dust, but you should ideally use a shop vac (will fit in combination with the rubber adapter in the sander's case) and/or go outside and it does not hurt to still protect yourself with a dust mask. The sandpaper should have the appropriate holes for dust extraction to work, of course!

@@ Line 16: / Line 16: @@
 * [http://www.holzwerken.net/Blog/Heiko-Rech/Eckig-oder-rund ''comparison of sheet vs. eccentric sanders on Holzwerken.net (DE)'']
+<br clear="all" />
-<br clear="all"/>
+<!--  NOTE: The following block "imports" content from separate pages - please don't change the code! To edit the actual information, please go back and click "edit" next to the section headline you are interested in :-)  -->
-== Bosch PSS 250 AE ==
+{{#ask:
-{{MachineInfoBox
+ [[MachineType::{{PAGENAME}}]]
-|machine name=Bosch PSS 250 AE
+ |order=ascending
-|german=Schwingschleifer
+ |format=embedded
-|image=Bosch PSS 250 AE.jpg
+ |embedonly=yes
-|used with=[[sandpaper]] - 93{{x}}185 mm (hook and loop)<br>or 93{{x}}230 mm (plain, clamped)
-|location=[[Location::Wood Workshop|wood workshop]]
-|manual=[https://www.manualslib.com/manual/1024645/Bosch-Pss-190-Ac.html ManualsLib]
 }}
-The Bosch PSS 250 AE can be used with hook-and-loop [[sandpaper]] strips, but regular ones can also be clamped in.
-It has a "microfilter" that ''reduces'' airborne dust, but you should ideally use a [[Shop Vac|shop vac]] (will fit in combination with the rubber adapter in the sander's case) and/or go outside and it does not hurt to still protect yourself with a [[Dust Mask|dust mask]]. The sandpaper should have the appropriate holes for dust extraction to work, of course!
-<br clear=all>
-== SKIL 7210 "Fox 2in1" ==
-{{MachineInfoBox
-|machine name=SKIL 7210 "Fox 2in1"
-|image=SKIL 7210.jpg
-|used with=[[sandpaper]] - 93{{x}}185 mm (hook and loop)
-|location=[[Location::Wood Workshop|wood workshop]]
-|manual=[https://www.skil.de/media/catalog/product/i/n/instrman_7210.pdf skil.de]
-|extrabox=yes
-}}
-The SKIL 7210 is a "multi" sander that can also be equipped with a [[Delta Sander|delta sander]]-like tip - unfortunately, that part is not included with the one we have.
-This sander can only be used outside and with a dust mask at the moment, its bag only traps the relatively large dust particles! Perhaps this could be improved with a custom [[Shop Vac|shop vac]] adapter.
 [[Category:Sanders]]
 [[Category:Woodworking]]