Network: Difference between revisions

Revision as of 18:39, 12 June 2020

The network at the CoMakingSpace is built up as follows:

Internet ---> 1&1 Router ---> Netgear WNDR3700v4 (Freifunk) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

Internet Connection

In order to connect to the internet, you can use SSID freifunk-rhein-neckar.de

Internal Network

In order to connect to the internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The key can be found in the common room.

DHCP is configures as follows:

IP	Host
192.168.1.1	TP-Link WDR4900
192.168.178.22	Raspberry Pi (next to the sound system)
192.168.178.23	Laserjet Printer
192.168.178.24	Raspberry Pi controlling the CNC Router
192.168.1.5	ESP8266 at the Flip Dot Display
192.168.1.6	ESP8266 at the Door Bell
192.168.1.7	Projector
192.168.1.8	Visionect Server
192.168.1.6 - 192.168.1.99	Open for further static services
192.168.1.100 - 192.168.1.250	IPs assigned by DHCP
192.168.1.255	Broadcast address

Within the internal network, the following services are provided:

Service	Host-IP	Hostname	Port
Mopidy (MPD Daemon)	192.168.178.22	comakingcontroller	6600
Mopidy (Webinterface)	192.168.178.22	comakingcontroller	8888
SSH	192.168.178.22	comakingcontroller	22
Visionect Server	192.168.1.8	visio	8081
Printing	192.168.178.23	laserjet8150	631
CNCjs	192.168.178.24	comakingcnc	8080

The static IPs will be assigned by the TP-Link WDR4900. If you want to add a service with a static IP please ask one of the TP-Link WDR4900 administrators to add your service and don't just grab a static IP.

Configuration Changes

If you need to change settings for the FritzBox Router (providing the CoMakingSpace network), please contact the management

For changing settings on any of the Raspberry Pi, please contact one of the management, Martin

@@ Line 16: / Line 16: @@
 |192.168.1.1 || TP-Link WDR4900
 |-
-|192.168.1.2 || Raspberry Pi (next to the [[Sound System|sound system]])
+|192.168.178.22 || Raspberry Pi (next to the [[Sound System|sound system]])
 |-
-|192.168.1.3 || [[Laser Printers#HP LaserJet 8150DN|Laserjet Printer]]
+|192.168.178.23 || [[Laser Printers#HP LaserJet 8150DN|Laserjet Printer]]
 |-
-|192.168.1.4 || Raspberry Pi controlling the [[CNC Router]]
+|192.168.178.24 || Raspberry Pi controlling the [[CNC Router]]
 |-
 |192.168.1.5 || ESP8266 at the [[Flip Dot Display]]
@@ Line 29: / Line 29: @@
 |-
 |192.168.1.8 || [[Visionect Server]]
-|-
-|192.168.1.20 || [[Laser Cutter]]
 |-
 |192.168.1.6 - 192.168.1.99 || Open for further static services
@@ Line 44: / Line 42: @@
 ! Service !! Host-IP !! Hostname !! Port
 |-
-| Mopidy (MPD Daemon) || 192.168.1.2 || comakingcontroller || 6600
+| Mopidy (MPD Daemon) || 192.168.178.22 || comakingcontroller || 6600
 |-
-| Mopidy (Webinterface) || 192.168.1.2 || comakingcontroller || 8888
+| Mopidy (Webinterface) || 192.168.178.22 || comakingcontroller || 8888
 |-
-| SSH || 192.168.1.2 || comakingcontroller || 22
+| SSH || 192.168.178.22 || comakingcontroller || 22
 |-
 | Visionect Server || 192.168.1.8 || visio ||8081
 |-
-| Printing || 192.168.1.3 || laserjet8150 || 631
+| Printing || 192.168.178.23 || laserjet8150 || 631
 |-
-| CNCjs || 192.168.1.4 || comakingcnc || 8080
+| CNCjs || 192.168.178.24 || comakingcnc || 8080
 |}
@@ Line 61: / Line 59: @@
 === Configuration Changes ===
-* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact the [[management]]
+* If you need to change settings for the FritzBox Router (providing the CoMakingSpace network), please contact the [[management]]
-* For changing settings on the Raspberry Pi, please contact the [[management]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]
-* For changing settings on the TP-Link WDR4900, please contact the [[management]] or [[User:Olaf|Olaf]]
+* For changing settings on any of the Raspberry Pi, please contact one of the  [[managers|management]], [[User:NitramLegov|Martin]]
 [[Category:Facilities]]
 [[Category:Raspberry Pi]]