Hole Saws: Difference between revisions
m (Location:: & Tutor:: for SMW) |
(trick if pilot drill bit can't be used) |
||
| Line 11: | Line 11: | ||
}} | }} | ||
Hole saws are [[Bits#Drill Bits|drill bits]] that consist of a saw blade holder and a central pilot drill bit which determines the position of the hole. Often, interchangeable saw blades are locked on the holder one at a time. | Hole saws are [[Bits#Drill Bits|drill bits]] that consist of a saw blade holder and a central pilot drill bit which determines the position of the hole. Often, interchangeable saw blades are locked on the holder one at a time. | ||
If you need guidance without the pilot drill bit (e.g. when cutting around a hole that is already larger than the pilot drill bit, or if you need discs without a hole), try clamping a template cut with the same hole saw on top of your workpiece.<sup> [http://www.holzwerken.net/Wissen/Tipps-Tricks/Tischlern/Runde-Scheiben-ohne-Mittenbohrung]</sup> | |||
We currently have a set of wood hole saws that can cut 44 mm deep and 26, 32, 39, 45, 51, 58 or 64 mm in diameter. | We currently have a set of wood hole saws that can cut 44 mm deep and 26, 32, 39, 45, 51, 58 or 64 mm in diameter. | ||
Revision as of 16:33, 3 July 2019
| ToolInfoBox Hole Saws | |
|---|---|
| |
| Synonyms: | bell saws, hole cutter bits; DE: Lochsägen, Kreisbohrer, Dosenbohrer, Bohrkronen, Topfsägen, Lochkranzbohrer |
| Type: | bits/saws |
| Material: | depends on type (wood, concrete or even metals) |
| Used with: | drills |
| Location: | drilling table (wood workshop |
| Access Requirements: | upon reading |
| Tutors: | Lukas |
Hole saws are drill bits that consist of a saw blade holder and a central pilot drill bit which determines the position of the hole. Often, interchangeable saw blades are locked on the holder one at a time.
If you need guidance without the pilot drill bit (e.g. when cutting around a hole that is already larger than the pilot drill bit, or if you need discs without a hole), try clamping a template cut with the same hole saw on top of your workpiece. [1]
We currently have a set of wood hole saws that can cut 44 mm deep and 26, 32, 39, 45, 51, 58 or 64 mm in diameter.
There is significant kickback when (mis-)using this tool, take the time do it right!
Proper Use
Put only a single saw blade into the holder when you want to use it!
Use a drill at relatively high speed but little pressure.
| ⌀ | max rpm |
|---|---|
| 26 - 39 mm | 1200 |
| 45 - 58 mm | 1000 |
| 64 mm | 800 |
No hammering drill can be used to saw holes.
Besides keeping the saws intact, please take personal safety precautions and wear safety goggles!
Past Issues
2018-3: the screw broke out of the aluminum blade holder - fixed by drilling/tapping a new hole opposite of it
