Scheppach DP 16 SL: Difference between revisions
(Redirected page to Drill Presses#Scheppach DP 16 SL) Tag: New redirect |
NitramLegov (talk | contribs) m (→Scheppach DP 16 SL: german) |
||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
== Scheppach DP 16 SL == | |||
{{MachineInfoBox | |||
|machine name=Scheppach DP 16 SL | |||
|image=Scheppach_dp_16sl.jpg | |||
|status=working '''[https://github.com/comakingspace/do-something/issues/213 except slowest speed]''' | |||
|type=Drill Press | |||
|german=Säulenbohrmaschine | |||
|location=[[Location::Drilling Table|drilling table]] | |||
|manual=[https://media.bahag.com/assets/26/66/2666194_25021243.pdf bahag.com] | |||
|assetid=58}} | |||
[[User:Blacksheep|Blacksheep]] kindly donated a Scheppach DP 16 SL drill press in August 2019.<br/> | |||
From a technical point of view, it offers the following: | |||
* Drill mount: 1 - 16 mm (neues Futter) | |||
* Speed: <strike>510</strike> 800 - 2430 rpm | |||
=== Drill Speeds === | |||
When changing the belt position, unlock the the motor hinge with the screw on the right side. Then move the belt on the pulley that reduces the diameter and afterwards change the belt position on the second pulley (similar to changing the chain on a bike). When the belt is in its final position, it should be '''level ''(waagerecht)''''' and have enough slack so the motor can be pushed back and re-locked with the screw. </br> | |||
'''The slowest speed is currently [https://github.com/comakingspace/do-something/issues/213 not available due to a broken pulley]! | |||
''' | |||
[[File:Scheppach Drill Speeds.JPG|600px|left|Gearing ratios]] | |||
<br clear=left> | |||
=== Depth Stop === | |||
The original depth stop collar broke relatively soon, so {{P}} designed a [https://github.com/comakingspace/CommonFiles/blob/master/3DPrintingFiles/Drill%20Press%20Depthstop.step 3D printable replacement part]. | |||
After several reprints that were broken soon after installation, we removed the stop screw so the collar only holds the safety shield now... | |||
=== Speed Chart === | |||
This chart was specifically created for the speeds that the Scheppach can provide. You can find it taped to the top of the machine. | |||
[[File:Scheppach Chart.jpg|left|650x650px]] | |||
<br clear="all" /> | |||
Latest revision as of 14:05, 18 July 2024
Scheppach DP 16 SL
| MachineInfoBox Scheppach DP 16 SL | |
|---|---|
| |
| Type: | Drill Presses |
| Location: | Drilling Table |
| Access Requirements: | Drill Introduction |
| Status: | Working |
| Manual: | bahag.com |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob |
Blacksheep kindly donated a Scheppach DP 16 SL drill press in August 2019.
From a technical point of view, it offers the following:
- Drill mount: 1 - 16 mm (neues Futter)
- Speed:
510800 - 2430 rpm
Drill Speeds
When changing the belt position, unlock the the motor hinge with the screw on the right side. Then move the belt on the pulley that reduces the diameter and afterwards change the belt position on the second pulley (similar to changing the chain on a bike). When the belt is in its final position, it should be level (waagerecht) and have enough slack so the motor can be pushed back and re-locked with the screw.
The slowest speed is currently not available due to a broken pulley!
Depth Stop
The original depth stop collar broke relatively soon, so Patrick designed a 3D printable replacement part.
After several reprints that were broken soon after installation, we removed the stop screw so the collar only holds the safety shield now...
Speed Chart
This chart was specifically created for the speeds that the Scheppach can provide. You can find it taped to the top of the machine.
