Hole Saws: Difference between revisions
(→Available Sizes: marketing video that nicely illustrates saw & drill change) |
(updated general info to fit new set) |
||
| Line 4: | Line 4: | ||
|synonyms=bell saws, hole cutter bits; DE: Lochsägen,<br>Kreisbohrer, Dosenbohrer, Bohrkronen,<br>Topfsägen, Lochkranzbohrer | |synonyms=bell saws, hole cutter bits; DE: Lochsägen,<br>Kreisbohrer, Dosenbohrer, Bohrkronen,<br>Topfsägen, Lochkranzbohrer | ||
|type=bits/[[:Category:Saws|saws]] | |type=bits/[[:Category:Saws|saws]] | ||
|access= | |access=read this page | ||
|location=[[Location::Drilling Table|drilling table]]<br>([[Location::Wood Workshop|wood workshop]] | |location=[[Location::Drilling Table|drilling table]]<br>([[Location::Wood Workshop|wood workshop]]) | ||
|material=depends on type ([[wood]], [[concrete]] or even [[metals]]) | |material=depends on saw type<br>([[wood]], [[concrete]] or even [[metals]]) | ||
|tutors=[[User:Lukas|Lukas]] | |tutors=[[User:Lukas|Lukas]] | ||
|used with=[[drills]] | |used with=[[drills]] | ||
| Line 17: | Line 17: | ||
== Proper Use == | == Proper Use == | ||
Use a [[Drills|drill]] at relatively high speed but little pressure. Make sure to provide horizontal guidance so the saw does not "walk" around: use the pilot drill (inside), a template (outside) and/or [[Drill Press|drill press]]. | |||
Use a [[Drills|drill]] at relatively high speed but little pressure. | |||
{| class="wikitable" | {| class="wikitable" | ||
| Line 44: | Line 42: | ||
Bosch "Progressor Electrician" set: 19, 25, 38, 44, 68, 83 mm in diameter | Bosch "Progressor Electrician" set: 19, 25, 38, 44, 68, 83 mm in diameter | ||
* can be expanded with further saws that are compatible with the Bosch "Power Change Plus" system!<sup> [https://m.youtube.com/watch?v=mLroETLYOxs short video]</sup> | * can be expanded with further saws that are compatible with the Bosch "Power Change Plus" system!<sup> [https://m.youtube.com/watch?v=mLroETLYOxs short video]</sup> | ||
Latest revision as of 01:38, 29 July 2022
| ToolInfoBox Hole Saws | |
|---|---|
| |
| Synonyms: | bell saws, hole cutter bits; DE: Lochsägen, Kreisbohrer, Dosenbohrer, Bohrkronen, Topfsägen, Lochkranzbohrer |
| Type: | bits/saws |
| Material: | depends on saw type (wood, concrete or even metals) |
| Used with: | drills |
| Location: | drilling table (wood workshop) |
| Access Requirements: | read this page |
| Tutors: | Lukas |
Hole saws are drill bits that consist of a saw blade holder and a central pilot drill bit which determines the position of the hole. Often, interchangeable saw blades are locked on the holder one at a time.
If you need guidance without the pilot drill bit (e.g. when cutting around a hole that is already larger than the pilot drill bit, or if you need discs without a hole), try clamping a template cut with the same hole saw on top of your workpiece. [1]
There is significant kickback when (mis-)using this tool, take the time do it right!
Proper Use
Use a drill at relatively high speed but little pressure. Make sure to provide horizontal guidance so the saw does not "walk" around: use the pilot drill (inside), a template (outside) and/or drill press.
| ⌀ | max rpm |
|---|---|
| 26 - 39 mm | 1200 |
| 45 - 58 mm | 1000 |
| 64 mm | 800 |
No hammering drill can be used to saw holes.
Besides keeping the saws intact, please take personal safety precautions and wear safety goggles!
Available Sizes
Bosch "Progressor Electrician" set: 19, 25, 38, 44, 68, 83 mm in diameter
- can be expanded with further saws that are compatible with the Bosch "Power Change Plus" system! short video
