Network: Difference between revisions
NitramLegov (talk | contribs) No edit summary |
NitramLegov (talk | contribs) No edit summary |
||
| Line 19: | Line 19: | ||
192.168.178.23 | 192.168.178.23 | ||
PC-192-168-178-3 (E-Room Access Point - in Work) | |||
LAN 4 mit 1 Gbit/s | |||
192.168.178.3 | |||
---- | ---- | ||
Revision as of 19:30, 10 July 2021
THIS PAGE NEEDS AN UPDATE BY Martin!
DHCP on the main FritzBox is configured to assign IP Adresses between 192.168.178.50 and 192.168.178.200
Recent IP Adresses outside this range:
CoMakingCNC
192.168.178.24
CoMakingController
LAN 4
192.168.178.22
laserjet8150
LAN 2
192.168.178.23
PC-192-168-178-3 (E-Room Access Point - in Work)
LAN 4 mit 1 Gbit/s
192.168.178.3
The network at the CoMakingSpace is built up as follows:
Internet ---> 1&1 Router ---> Netgear WNDR3700v4 (Freifunk) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)
Internet Connection
In order to connect to the internet, you can use SSID freifunk-rhein-neckar.de
Internal Network
In order to connect to the internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The key can be found in the common room.
DHCP is configures as follows:
| IP | Host |
|---|---|
| 192.168.1.1 | TP-Link WDR4900 |
| 192.168.178.22 | Raspberry Pi (next to the sound system) |
| 192.168.178.23 | Laserjet Printer |
| 192.168.178.24 | Raspberry Pi controlling the CNC Router |
| 192.168.1.5 | ESP8266 at the Flip Dot Display |
| 192.168.1.6 | ESP8266 at the Door Bell |
| 192.168.1.7 | Projector |
| 192.168.1.8 | Visionect Server |
| 192.168.1.9 | Buzzer API Pi |
| 192.168.1.10 - 192.168.1.99 | Open for further static services |
| 192.168.1.100 - 192.168.1.250 | IPs assigned by DHCP |
| 192.168.1.255 | Broadcast address |
Within the internal network, the following services are provided:
| Service | Host-IP | Hostname | Port |
|---|---|---|---|
| Mopidy (MPD Daemon) | 192.168.178.22 | comakingcontroller | 6600 |
| Mopidy (Webinterface) | 192.168.178.22 | comakingcontroller | 8888 |
| SSH | 192.168.178.22 | comakingcontroller | 22 |
| Visionect Server | 192.168.1.8 | visio | 8081 |
| Printing | 192.168.178.23 | laserjet8150 | 631 |
| CNCjs | 192.168.178.24 | comakingcnc | 8080 |
| Buzzer API | 192.168.1.9 | BuzzerPi | 5000 |
The static IPs will be assigned by the TP-Link WDR4900. If you want to add a service with a static IP please ask one of the TP-Link WDR4900 administrators to add your service and don't just grab a static IP.
Configuration Changes
If you need to change settings for the FritzBox Router (providing the CoMakingSpace network) or any of the Raspberry Pis, please contact Martin.
