WoodSter 2 BS 412
From CoMakingSpace Wiki
(Redirected from Woodster 2)
WoodSter 2 BS 412
| MachineInfoBox WoodSter 2 BS 412 | |
|---|---|
| |
| Type: | Vertical Bandsaws |
| Material: | wood |
| Used with: | 1865 mm bandsaw blades |
| Location: | Wood Workshop |
| Access Requirements: | Vertical Bandsaw Introduction |
| Status: | Working |
| Manual: | printout by the machine; nearly identical PDF: Inca EURO 260 (inca-maschinen.ch) |
| Tutors: | Lukas Pakue Jakob Loewenstein |
The "WoodSter 2 BS 412" is a medium-size vertical bandsaw for 1865 mm blades.
It is very similar, if not identical, to an Inca EURO 260. [1]
Specs
- cutting height: 155 mm
- throat clearance (Ausladung): 260 mm
- wheel diameter: 280 mm
- blade (DE and EN manual sections differ?!)
- blade length: 1865 mm
- blade width: 3-15 mm (DE)/3-18 mm (EN)
- blade thickness: 0.4-0.65 mm (DE)/0.5 mm (EN)
- motor speed: 1000 rpm
- table tilt: max. 45°
Blade Guides
Please use these pictures for reference when setting up the blade guides (bottom guides are not shown, but behave the same):
Upgrades
We improved this saw a bit already:
- 3D printed Festool shop vac adapter
- lamp
Further plans:
- better power supply (table-mounted extension cord)
- outfeed table
- ...jigs?!
