New pages

26 September 2026

• 07:5207:52, 26 September 2026 Milling cutter data (hist | edit) [2,961 bytes] Maker-Joe (talk | contribs) (Created page with "This page contains information on selecting milling cutters and cutting parameters for the CNC machines. General considerations While milling, make sure you're producing small chips rather than fine dust. Increase the feed rate and reduce the spindle speed to prevent the cutter from annealing. High spindle speeds CNC spindles can operate at relatively high speeds (16,000 RPM and above). This can lead to heat problems, because the milling cutter keeps rubbing against t...")

19 September 2026

• 07:2307:23, 19 September 2026 Blackbox - CNC Router (hist | edit) [2,746 bytes] Maker-Joe (talk | contribs) (Created page with "New Page")

18 September 2026

• 07:2307:23, 18 September 2026 Kress CNC Portal Mill (hist | edit) [6,048 bytes] Maker-Joe (talk | contribs) (Created page with "new page") Tag: Visual edit

17 September 2026

• 20:1820:18, 17 September 2026 Workbee - CNC Router (hist | edit) [8,316 bytes] Maker-Joe (talk | contribs) (Created page with "== WorkBee == {{MachineInfoBox |machine name=Ooznest WorkBee CNC |german=CNC-Plattenfräse|image=Ooznest_WorkBee_CNC.JPG |synonyms=DE: CNC-Fräse, CNC-Plattenfräse, Portalfräsmaschine |type=CNC Router |material=wood |location=CNC area |status= |firmware=RepRapFirmware |assetid=3|software=Fusion360 or other CAM Software |manual=[http://ooznest.co.uk/WorkBee-CNC-Full-Kit product page], click "documentation" tab |used with=6 mm, 8 mm,...")
• 18:4118:41, 17 September 2026 CNC Mills and Routers (hist | edit) [3,543 bytes] Maker-Joe (talk | contribs) (Initial page, to start cleaning up the various CNC router/mill information.) Tag: Visual edit

15 September 2026

• 12:4412:44, 15 September 2026 PLA & Order (hist | edit) [380 bytes] Lukas (talk | contribs) (rough start of a table (images should be smaller, not yet sure how))

14 September 2026

• 17:4317:43, 14 September 2026 Gridfinity (hist | edit) [1,829 bytes] Lukas (talk | contribs) (Created page with "Gridfinity is an open source modular storage concept published by YouTuber Zach Freeman. It bases on a 42x42 mm grid that can turn any flat surface (e.g. a drawer bottom) into a base for custom 3D printed containers. == Slotfinity == ''In progress (drill area)'' C:3D Printing C:Storage")

12 September 2026

• 18:4118:41, 12 September 2026 Frame Saw (hist | edit) [2,161 bytes] Neo (talk | contribs) (new created) originally created as "Frame saw"

9 September 2026

• 21:1821:18, 9 September 2026 Hartlötgerät Einweisung (hist | edit) [503 bytes] NitramLegov (talk | contribs) (Initial Creation) Tag: Visual edit
• 13:0113:01, 9 September 2026 Plenum/Meeting minutes/2026-07-25 (hist | edit) [7,606 bytes] Neo (talk | contribs) (Created page with " == Berichte seit dem letzten Treffen • Eine Anleitung zur Organisation eines Introduction-Days (Tag voller Einführungen für Geräte) befindet sich im Wiki. Jede Person ist eingeladen das zu organisieren. Vorteile: Neue Tutoren können ausgebildet werden, viele neue Einweisungen für Mitglieder • Esther, Adam und Andi bilden ein Team Workshops o Koordinieren und helfen bei der Planung und Umsetzung o Jede Person mit einer Workshopidee, die man selbst durchführen...")

27 August 2026

• 11:1211:12, 27 August 2026 Silvercrest Overlock SON 90 A1 (hist | edit) [2,773 bytes] NitramLegov (talk | contribs) (Creation of the stub) Tag: Visual edit

26 August 2026

• 08:1508:15, 26 August 2026 Category:Metal Benders (hist | edit) [143 bytes] Lukas (talk | contribs) (Created page with "Shaping metal often requires not only cutting, but also precise bending. These machines, tools or jigs may help!") originally created as "Metal Benders"

13 August 2026

• 00:4000:40, 13 August 2026 Hama L43 (hist | edit) [764 bytes] Lukas (talk | contribs) (Created page with "==Hama L43== {{MachineInfoBox |machine name=Hama L43 |image= |synonyms=Hama 00050023; DE: Laminiergerät |type=Laminator |german=Laminiergerät |material=paper, laminating pouches |status= |firmware= |software= |manual=[https://manualzz.com/doc/52097229/hama-00050023-laminator--l43--din-a4-benutzerhandbuch manualzz.com] |used with= |similar= |assetid= }} {{Commissioning |IssueNumber= |Naming=done |NamingComment= |Picture= |PictureComm...")

18 July 2026

• 13:5413:54, 18 July 2026 Wanted:Metabo TF 100 M (hist | edit) [3,649 bytes] Neo (talk | contribs) (Createt page) Tag: Visual edit originally created as "Metabo TF 100 M"

13 July 2026

• 17:5017:50, 13 July 2026 Plenum/Meeting minutes/2026-06-13 (hist | edit) [3,584 bytes] Neo (talk | contribs) (Created protokoll) Tag: Visual edit

12 July 2026

• 15:3415:34, 12 July 2026 Cassette & Sprocket Removal Tools (hist | edit) [321 bytes] AndyWinzen (talk | contribs) (Created page with " {{ToolInfoBox |tool name=Cassette & Sprocket Removal Tools |german= Werkzeuge zur Zahnkranz- & Ritzel-Demontage |image= Bicycle Cone Wrench.jpg |synonyms=DE:Werkzeuge zur Zahnkranz- & Ritzel-Demontage |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }}") Tag: Visual edit: Switched
• 15:2515:25, 12 July 2026 Crimper (hist | edit) [4,531 bytes] AndyWinzen (talk | contribs) (Created page with "{{ToolInfoBox |tool name=Cable Cutter and Crimper |german= Fahrrad-Bowdenzugschneider mit integrierter Crimpfunktion |image= Bicycle Cone Wrench.jpg |synonyms=DE:Fahrrad-Bowdenzugschneider mit integrierter Crimpfunktion |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }}") Tag: Visual edit: Switched
• 13:5413:54, 12 July 2026 Wire Rope Pullers & Wire Rope Shears (hist | edit) [3,397 bytes] AndyWinzen (talk | contribs) (Created page with "{{ToolInfoBox |tool name=Cable Pullers & Cable Cutters |german= Kabelzieher und Kabelschneider |image= |synonyms=DE:Kabelzieher und Kabelschneider |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }} <h1 style="color: #1a365d; border-bottom: 2px solid #e2e8f0; padding-bottom: 8px; font-family: sans-serif; margin-top: 0;">Wiki Entry: Eldi Cable Pullers & Cable Cutters</h1> <p style="font-size: 1....") Tag: Visual edit: Switched originally created as "Cable Pullers & Cable Cutters"
• 13:4213:42, 12 July 2026 Headset Spanners (hist | edit) [4,201 bytes] AndyWinzen (talk | contribs) (Created page with " {{ToolInfoBox |tool name=Headset Spanners |german= Steuersatzschlüssel |image= |synonyms=DE:Steuersatzschlüssel |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }}") Tag: Visual edit: Switched
• 13:1713:17, 12 July 2026 Combination Headset Wrench / Hook Spanner (hist | edit) [5,494 bytes] AndyWinzen (talk | contribs) (Created page with " {{ToolInfoBox |tool name=Combination Headset Wrench / Hook Spanner |german= Hakenschlüssel / Nutmutternschlüssel |image= Bicycle Cone Wrench.jpg |synonyms=DE:Hakenschlüssel / Nutmutternschlüssel |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }} <h1 style="color: #1a365d; border-bottom: 2px solid #e2e8f0; padding-bottom: 8px; font-family: sans-serif;">Wiki Entry: Special Tools for Classi...") Tag: Visual edit: Switched
• 12:3212:32, 12 July 2026 Chain Rivet Tools / Chain Breakers (hist | edit) [4,185 bytes] AndyWinzen (talk | contribs) (Created page with " {{ToolInfoBox |tool name= Bicycle Chain Rivet Tools |german= Konusschlüssel |image= Bicycle Cone Wrench.jpg |synonyms=DE:Konusschlüssel |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }} <h2>Overview: Bicycle Chain Rivet Tools (Chain Breakers)</h2> <p>Below is a technical breakdown of the five different bicycle chain rivet tools shown in the image, organized by their layout position as a refe...") Tag: Visual edit: Switched
• 12:2412:24, 12 July 2026 Chainring Straightening Tool (hist | edit) [5,601 bytes] AndyWinzen (talk | contribs) (Created page with " {{ToolInfoBox |tool name=Chainring Straightening Tool |german= Richtwerkzeug für Kettenblätter und Kurbelsterne |image= |synonyms=DE:Richtwerkzeug für Kettenblätter und Kurbelsterne |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }}") Tag: Visual edit: Switched
• 10:5110:51, 12 July 2026 Bottom Bracket Tools (hist | edit) [2,817 bytes] AndyWinzen (talk | contribs) (Created page with " ==$1== {{ToolInfoBox |tool name=Bicycle Bottom Bracket Tools |german= Fahrrad-Innenlagerwerkzeuge |image= |synonyms=DE:Fahrrad-Innenlagerwerkzeuge |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }} <h2>Overview: Bicycle Bottom Bracket Tools</h2> <p>Below is a technical breakdown of the three specialized bicycle bottom bracket tools shown on the image, organized from left to right as a referenc...") Tag: Visual edit: Switched originally created as "Bicycle Bottom Bracket Tools"
• 10:2610:26, 12 July 2026 Wheel Truing Stands (hist | edit) [5,253 bytes] AndyWinzen (talk | contribs) (Created page with " {{ToolInfoBox |tool name= Bicycle Truing Stand – Preciray Type B |german= Fahhrad Zentrierstäder - Preciray Type B |image= Bicycle Cone Wrench.jpg |synonyms=DE:Fahhrad Zentrierstäder - Preciray Type B |type= |status= |material= |used with= |location= Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }}") Tag: Visual edit: Switched originally created as "Bicycle Truing Stand – Preciray Type B"
• 10:0510:05, 12 July 2026 Bike Repair Stands (hist | edit) [4,181 bytes] AndyWinzen (talk | contribs) (Created page with " {{ToolInfoBox |tool name= VAR Bicycle Repair Stand |german= VAR Fahhrad Montageständer |image= |synonyms=DE: VAR Fahhrad Montageständer |type= |status= |material= |used with= |location=Location::Bike Lounge |access= |made by= |tutors= |manual= |similar= }} VAR Dual-Montageständer (Modell aus den 1980er-Jahren)Dieses Modell des französischen Herstellers VAR ist ein robuster Profi-Doppelarbeitsplatz für die Fahrradwartung. Gefertigt aus massivem Stahl, ist diese...") Tag: Visual edit: Switched originally created as "VAR Dual - Montageständer"