Sewing Machine Introduction: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) (First Version) |
(→Safety: Stoff kann jederzeit gewechselt werden, aber *Faden* nur bei ausgesteckter Maschine) |
||
| Line 7: | Line 7: | ||
!Precaution | !Precaution | ||
|- | |- | ||
|Sharp | |Sharp needle | ||
| | |DO NOT put your fingers under the needle while working with the machine - use the presser foot as a minimum distance guide | ||
|- | |- | ||
| | |Exposed moving mechanical parts | ||
|Ensure the machine is turned off and disconnected from power when changing the needle or | |Ensure the machine is turned off and disconnected from power when changing the needle, [[thread]], or accessing any of the inner parts | ||
|- | |- | ||
|Hot | |Hot lamp | ||
| | |DO NOT touch the lamp after the sewing machine has run for a while | ||
|} | |} | ||
Revision as of 22:55, 14 July 2021
This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!
Safety
| Dangers | Precaution |
|---|---|
| Sharp needle | DO NOT put your fingers under the needle while working with the machine - use the presser foot as a minimum distance guide |
| Exposed moving mechanical parts | Ensure the machine is turned off and disconnected from power when changing the needle, thread, or accessing any of the inner parts |
| Hot lamp | DO NOT touch the lamp after the sewing machine has run for a while |
Demonstration
The Tutor will show you during the introduction how to:
- thread the yarn both from the bottom and the top of the machine
- roll up custom threads on the spools
- free up the yarn in case it gets tangled up
- change the needle
- change the presser foot
- change the sewing direction
- operate the machine
After the demonstration by the tutor, you will create a trial seam.
