Project:Laptop Stand: Difference between revisions

From CoMakingSpace Wiki

No edit summary
m (typos)
Line 1: Line 1:
[[Luzian]] wanted to have a laptop stand since he sits in front of my 13" laptop a few hours a day and looking down on it's screen wasn't good for his posture.  
[[Luzian]] wanted to have a laptop stand since he sits in front of his 13" laptop a few hours a day and looking down on its screen wasn't good for his posture.  


== V1 ==
== V1 ==
Line 17: Line 17:
}}
}}


[[Luzian]] actually wanted to mill it out of plywood on the [[CNC Router]] but then he just used the Laser cutter. The downside of laser cutting was having to clean up the burnt edges which as you might know if you used a laser cutter your self is'n a lot of fun.<br/>
[[Luzian]] actually wanted to mill it out of plywood on the [[CNC Router]] but then he just used the Laser cutter. The downside of laser cutting was having to clean up the burnt edges which - as you might know if you have used a laser cutter yourself - isn't a lot of fun.<br/>
Also the angel in which the laptop is sitting is to steep and the catches are too small. Therefore the laptop falls of easily when you touch it. <br/>
Also, the angle in which the laptop is sitting is too steep and the catches are too small. Therefore the laptop falls off easily when you touch it. <br/>
The built is not ideal, but it making it provided some important lessons which will be incorporated into future verions.
The build is not ideal, but making it provided some important lessons which will be incorporated into future verions.

Revision as of 16:31, 18 April 2019

Luzian wanted to have a laptop stand since he sits in front of his 13" laptop a few hours a day and looking down on its screen wasn't good for his posture.

V1

ProjectInfoBox

Laptop Stand V1

Laptop stand v1.png
Status: finished
Release Date: 4-2019
Initiator: Luzian
Materials Used: MDF
Tools Used: Laser Cutter
Software Used: Fusion 360
Approx. Cost: <10$


Luzian actually wanted to mill it out of plywood on the CNC Router but then he just used the Laser cutter. The downside of laser cutting was having to clean up the burnt edges which - as you might know if you have used a laser cutter yourself - isn't a lot of fun.
Also, the angle in which the laptop is sitting is too steep and the catches are too small. Therefore the laptop falls off easily when you touch it.
The build is not ideal, but making it provided some important lessons which will be incorporated into future verions.