Felder AF 14
From CoMakingSpace Wiki
Felder AF 14
| MachineInfoBox Felder AF 14 | |
|---|---|
| |
| Type: | Dust Extractor |
| Used with: | jointer-planer |
| Location: | CNC Area |
| Access Requirements: | |
| Status: | available |
| Manual: | felder-gruppe.at (DE) |
| Tutors: | |
The Felder AF 14 should be in close proximity to the jointer-planer.
The system should be hooked up through the automated switch box (switched output) mounted on the metal frame, that should also be connected to the planer (trigger output). Once the planer is started the vacuum system will turn on after 3 seconds and turn off once the planer is off for 8 seconds. Make sure to set the switch on the vacuum motor to '1' (ON) before starting!
Collection bag dimensions 2x850x1300x0.1mm (original Felder).
