CMI C-S-BS 250: Difference between revisions
From CoMakingSpace Wiki
m (Has caption: testing whether first value in source code is displayed in galleries) |
m (hilft alles nix - Workaround: extrabox + "set" für alle Galerie-Parameter) |
||
| Line 1: | Line 1: | ||
<br> | <br> | ||
== CMI C-S-BS 250 == | == CMI C-S-BS 250 == | ||
{{MachineInfoBox | {{MachineInfoBox | ||
|machine name=CMI C-S-BS 250 | |machine name=CMI C-S-BS 250 | ||
| Line 19: | Line 15: | ||
|donation= | |donation= | ||
|similar=[[Scroll Saw|scroll saw]] | |similar=[[Scroll Saw|scroll saw]] | ||
|extrabox=yes | |||
}} | }} | ||
This small bandsaw does not have much power, but is nice for learning the basics and in case you just need to make some curvy or cold cuts through soft metals. | This small bandsaw does not have much power, but is nice for learning the basics and in case you just need to make some curvy or cold cuts through soft metals. | ||
| Line 31: | Line 28: | ||
* max. blade thickness - 0.36 mm<sup> [https://www.shopbox24.de/werkzeugstahl-premium-saegeband-1400-mm-x-6-mm-x-0-36-mm-x-14-zaehne-pro-zoll-fuer-weiche-metalle-wie-bronze-kupfer-und-aluminium/a-58501/]</sup> | * max. blade thickness - 0.36 mm<sup> [https://www.shopbox24.de/werkzeugstahl-premium-saegeband-1400-mm-x-6-mm-x-0-36-mm-x-14-zaehne-pro-zoll-fuer-weiche-metalle-wie-bronze-kupfer-und-aluminium/a-58501/]</sup> | ||
* max. cutting depth - 80 mm | * max. cutting depth - 80 mm | ||
{{#set: | |||
Machinetype=Bandsaw | |||
|Has caption=Metal Bandsaw | |||
|Has German=Metall-Bandsäge | |||
|Has image=File:CMI_C_S_BS_250.JPG | |||
}} | |||
Revision as of 03:03, 5 February 2022
CMI C-S-BS 250
| MachineInfoBox CMI C-S-BS 250 | |
|---|---|
| |
| Synonyms: | CMI C-BAN-250 (probably the same); DE: "Metall-Bandsäge" |
| Type: | [[power saw]] |
| Material: | metal (depending on blade); wood (currently not intended) |
| Used with: | 1400 mm bandsaw blades |
| Location: | metal workshop |
| Access Requirements: | |
| Manual: | nearly identical: Westfalia RBS 205 |
| Tutors: | |
| Similar (More or Less): | scroll saw |
[[MachineType::power saw| ]]
This small bandsaw does not have much power, but is nice for learning the basics and in case you just need to make some curvy or cold cuts through soft metals.
The blade guides are very simple, just consisting of two pins for the sides and a bearing for the back of the blade. Ignaz is going to turn an eccentric bearing mount to increase their lifetime (by default, the blade runs too close to the center of the bearing).
Please refer to the proper blade-guide distances explained in our bandsaw introduction, NOT the ones from the manual!
Specs:
- blade length - 1400 mm
- max. blade width - ???
- max. blade thickness - 0.36 mm [1]
- max. cutting depth - 80 mm
