Lab Power Supplies
Power supplies are an essential tool for working with electronics [citation needed]. They come in various different shapes and sizes reaching from "wall warts", usually with a fixed voltage, to adjustable laboratory supplies. For usage it is important to know the specifications of the supply e.g. the maximum current and voltage output. For the most part power supplies output DC; for AC have a look at a transformer.
Adjustable Power Supplies
| MachineInfoBox Adjustable Power Supply | |
|---|---|
| |
| Synonyms: | DE: Labornetzteil |
| Access Requirements: | Read the Wiki PageSome use of "" in your query was not closed by a matching "". |
| Tutors: | Some use of "" in your query was not closed by a matching "". |
Adjustable power supplies, sometimes also referred to as laboratory power supplies, can be set up to output various currents or voltages within their specification. Some supplies can only be set to a given voltage, while others can also limit the current to a maximum value.
They are normally used for powering electronic circuits as they can output a broad range of voltages and can protect circuits from too high currents trough a current limit. Most laboratory supplies have isolated outputs meaning they are not referenced to ground. This allows for combining multiple supplies (in series or in parallel) to increase voltage of current and avoid shorts while working on grounded devices. To check whether a supply is isolated, take a look at the outputs. If there is, besides the positive and negative, a third (usually green) terminal then the supply is isolated. This third terminal is directly connected to ground, so in order to reference the supply to ground connect one of the outputs to it. Have a look at the manual in case something isn't clear or ask one of the tutors for the Electronics Room.
RND 320-KD3005D
| MachineInfoBox RND 320-KD3005D | |
|---|---|
| |
| Synonyms: | DE: Labornetzteil |
| Type: | Lab Power Supplies |
| Location: | Electronics Area |
| Access Requirements: | Read the Wiki Page |
| Status: | Working |
| Tutors: | |
- regulated power supply with max 30V/5A output
- adjustment in 10 mV or 1 mA steps
Voltcraft HPS-13015
| MachineInfoBox Voltcraft HPS-13015 | |
|---|---|
| |
| Synonyms: | DE: Labornetzteil |
| Type: | Lab Power Supplies |
| Location: | Electronics Area |
| Access Requirements: | Read the Wiki Page |
| Status: | Working |
| Manual: | conrad.com |
| Tutors: | |
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | done |
| Find the manual as PDF | found at conrad.com | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | - | not needed |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
Voltcraft LPS1305
| MachineInfoBox Voltcraft LPS1305 | |
|---|---|
| |
| Synonyms: | DE: Labornetzteil |
| Type: | Lab Power Supplies |
| Location: | Electronics Area |
| Access Requirements: | Read the Wiki Page |
| Status: | Working |
| Manual: | Conrad Produktinfo |
| Tutors: | |
