Dust Extractors
From CoMakingSpace Wiki
Felder AF 14
| MachineInfoBox Felder AF 14 | |
|---|---|
| |
| Used with: | jointer-planer |
| Access Requirements: | Some use of "" in your query was not closed by a matching "". |
| Manual: | felder-gruppe.at (DE) |
| Tutors: | Some use of "" in your query was not closed by a matching "". |
The Felder AF 14 should be in close proximity to the jointer-planer.
The system should be hooked up through the automated switch box (switched output) mounted on the metal frame, that should also be connected to the planer (trigger output). Once the planer is started the vacuum system will turn on after 3 seconds and turn off once the planer is off for 8 seconds. Make sure to set the switch on the vacuum motor to '1' (ON) before starting!
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | pending |
| Take a picture | - | pending |
| Find the manual as PDF | felder-gruppe.at (DE) | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | - | pending |
| Security Check | to be done or witnessed by a manager | done |
| Test | to be done or witnessed by a manager | done |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
