Handheld Circular Saws
From CoMakingSpace Wiki
| ToolInfoBox Herkules BHK 1600LE "Laser Beam" | |
|---|---|
| |
| Synonyms: | buzz saw; DE: Handkreissäge |
| Type: | power tool/saw |
| Material: | wood |
| Location: | wood workshop |
| Access Requirements: | upon introduction |
| Tutors: | Lukas |
| Manual: | Einhell HKS-1500 Laser is very similar |
| Similar (More or Less): | table saw, chop saw |
This page is about handheld circular saws. Other varieties exist: a chop saw is useful if you want to cut narrow planks or posts, while a table saw is especially suited for cutting medium-sized boards and panels. Perhaps we'll also build a panel saw for large stock at some point!
All circular saws cut with a rotating circular saw blade that may have teeth or an abrasive edge, depending on what material it is for.
Safety
- wear protective goggles and ear defenders no matter what you want to cut
- hook up a shop vac before cutting
* some sawdust will still be expelled, so you might want to put on a dust mask
- safely clamp down a fence and your workpiece to avoid surprises during the cut
- double-check the planned cut path - no clamps or table in the way?
- firmly guide the saw with both hands, that way they're clear of the blade
- turn on the saw without the blade touching the workpiece and only start cutting once it is rotating at full speed
Saw Blades
We need to double check if this applies to our saw as well, but the very similar "Einhell HKS-1500 Laser" uses 190 mm OD - 20 mm mounting hole diameter blades.
