File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 09:39, 28 February 2020 | Festival radio battery check.jpg (file) |  |
417 KB | Lukas (talk | contribs) | Project:Festival Radio nice view of most components as the battery voltage is checked after charging | 1 |
| 01:31, 26 February 2020 | Film faced plywood.jpg (file) |  |
587 KB | Lukas (talk | contribs) | view onto a sheet of film faced plywood with two small holes drilled from the other side (note the tearout!) and a larger hole cut with a hole saw | 1 |
| 01:07, 26 February 2020 | Wire mesh plywood - closeup.JPG (file) |  |
496 KB | Lukas (talk | contribs) | the structured side of wire mesh plywood along with some sawn or routed cross-sections | 1 |
| 01:00, 26 February 2020 | Drahtkaninchen.JPG (file) |  |
554 KB | Lukas (talk | contribs) | Kaninchendraht. | 1 |
| 00:54, 26 February 2020 | Routing a recess.JPG (file) |  |
690 KB | Lukas (talk | contribs) | a recess for a door lock is cut into wire mesh plywood with a router | 1 |
| 00:43, 26 February 2020 | Weathered film-faced plywood.JPG (file) |  |
365 KB | Lukas (talk | contribs) | film-faced plywood does age under outdoor conditions, but stays stable for a relatively long time | 1 |
| 00:06, 26 February 2020 | Rectangle router jig.JPG (file) |  |
530 KB | Lukas (talk | contribs) | our rectangle router jig after it has just been used to cut a precise hole for a 3D printed part | 1 |
| 19:11, 25 February 2020 | Chisel bits.jpg (file) |  |
227 KB | Lukas (talk | contribs) | some SDS chisel bits in their package (cropped from File:SDS bits.JPG) | 1 |
| 02:03, 24 February 2020 | MV.JPG (file) |  |
1.54 MB | NitramLegov (talk | contribs) | 1 | |
| 01:55, 24 February 2020 | Vertical Farm - Building Done.jpeg (file) |  |
1.2 MB | NitramLegov (talk | contribs) | 1 | |
| 01:55, 24 February 2020 | Vertical Farm - Building Step 1.JPG (file) |  |
5.56 MB | NitramLegov (talk | contribs) | 1 | |
| 01:54, 24 February 2020 | Vertical Farm - Planting step 0.jpg (file) |  |
187 KB | NitramLegov (talk | contribs) | 1 | |
| 01:51, 24 February 2020 | Vertical Farm - Routing.JPG (file) |  |
4.76 MB | NitramLegov (talk | contribs) | 1 | |
| 01:46, 24 February 2020 | Vertical Farm - planting step 3.JPG (file) |  |
6.69 MB | NitramLegov (talk | contribs) | 1 | |
| 01:45, 24 February 2020 | Vertical Farm - planting step 2.JPG (file) |  |
5.39 MB | NitramLegov (talk | contribs) | 1 | |
| 01:45, 24 February 2020 | Vertical Farm - Planting step 1.JPG (file) |  |
5.51 MB | NitramLegov (talk | contribs) | 1 | |
| 01:45, 24 February 2020 | Vertical Farm - Planning.jpeg (file) |  |
944 KB | NitramLegov (talk | contribs) | 1 | |
| 01:45, 24 February 2020 | Vertical Farm - done.JPG (file) |  |
2.48 MB | NitramLegov (talk | contribs) | 1 | |
| 01:44, 24 February 2020 | Vertical Farm - Needed Materials.JPG (file) |  |
4.95 MB | NitramLegov (talk | contribs) | 1 | |
| 01:44, 24 February 2020 | Vertical Farm - Cutting Step 2 - Marking and Measuring.jpg (file) |  |
89 KB | NitramLegov (talk | contribs) | 1 | |
| 01:44, 24 February 2020 | Vertical Farm - cutting step 1.JPG (file) |  |
5.4 MB | NitramLegov (talk | contribs) | 1 | |
| 01:14, 24 February 2020 | Community Wall.JPG (file) |  |
5.77 MB | NitramLegov (talk | contribs) | 1 | |
| 23:33, 16 February 2020 | 3D Corner.JPG (file) |  |
6.17 MB | NitramLegov (talk | contribs) | 1 | |
| 08:51, 12 February 2020 | Miter box.jpg (file) |  |
665 KB | Lukas (talk | contribs) | miter box being used to cut a round woodturning blank | 1 |
| 23:51, 11 February 2020 | Miter saw (manual).jpg (file) | .jpg) |
778 KB | Lukas (talk | contribs) | Manually moved miter saw, not to be confused with a powered chop saw | 1 |
| 17:08, 18 January 2020 | Plenum without common room.jpg (file) |  |
3.79 MB | Lukas (talk | contribs) | With the common room still under construction (and dark!), the January 2020 plenum took place in the wood workshop :-D | 1 |
| 16:14, 25 December 2019 | Eierbrettchen.jpg (file) |  |
90 KB | Lukas (talk | contribs) | "Eierbecher" aus einem Stück Kirsche(?) mit einem Loch und einem versteckten Magneten - aus einer Schulwerkstatt | 1 |
| 11:22, 26 November 2019 | Carlos wiki CoMaking.png (file) |  |
177 KB | Carlos (talk | contribs) | 1 | |
| 03:14, 23 November 2019 | Wandverbindungen - T-Verbindung.png (file) |  |
110 KB | Lukas (talk | contribs) | Trockenbau - Anordnung der CW-Profile und der OSB-Beplankung an einer T-Verbindung | 1 |
| 03:11, 23 November 2019 | Wandverbindungen - Ecke.png (file) |  |
111 KB | Lukas (talk | contribs) | Trockenbau - Anordnung der CW-Profile und der OSB-Beplankung an einer Ecke | 1 |
| 18:03, 20 November 2019 | Ständerabstand.png (file) |  |
301 KB | Lukas (talk | contribs) | Trockenbau - Abstand der CW-Profile mit Fixpunkten, an denen wir anfangen müssen | 1 |
| 20:46, 15 November 2019 | Wandverbindungen - Anordnung UW-Profile.png (file) |  |
115 KB | Lukas (talk | contribs) | Trockenbau: wie die T- und Eckverbindungen der UW-Profile an Decke und Boden aussehen sollten, damit wir unsere Wände nachher sinnvoll reinstellen können | 1 |
| 20:07, 2 November 2019 | Siemensstraße CommonRoom Option2.png (file) |  |
490 KB | NitramLegov (talk | contribs) | 1 | |
| 20:06, 2 November 2019 | Siemensstraße CommonRoom Option1.png (file) |  |
385 KB | NitramLegov (talk | contribs) | 1 | |
| 20:05, 2 November 2019 | Siemensstraße Workshop.png (file) |  |
251 KB | NitramLegov (talk | contribs) | 1 | |
| 09:53, 30 October 2019 | Wild cherry logs sealed.jpg (file) |  |
550 KB | Lukas (talk | contribs) | Project:Drying Timber - two wild cherry logs shortly after cutting & sealing | 1 |
| 23:02, 29 October 2019 | Layout Siemensstraße.jpeg (file) |  |
78 KB | NitramLegov (talk | contribs) | 1 | |
| 00:18, 24 October 2019 | Alpha Tools 960-125 disc lock.jpg (file) |  |
2.58 MB | Lukas (talk | contribs) | as the locking pin of the Alpha Tools 960/125 disc grinder is broken, you need to lock the axis with a flat 17 mm wrench (should be attached to the key for the opposite side) | 1 |
| 19:12, 15 October 2019 | Airlag chess figures 20191013 161728.png (file) |  |
7.41 MB | Airlag (talk | contribs) | figures trial 2 - total fail | 1 |
| 23:05, 14 October 2019 | Airlag chess figures knight4-3.png (file) |  |
957 KB | Lukas (talk | contribs) | 4:3 crop of File:Airlag chess figures 20191004 190047.png for Project:Wiki Slideshow ''original photo by Airlag'' | 1 |
| 17:40, 10 October 2019 | Airlag chess figures 20191004 185619.png (file) |  |
1.14 MB | Airlag (talk | contribs) | figure set 1b | 1 |
| 17:39, 10 October 2019 | Airlag chess figures 20191004 185636.png (file) |  |
1.13 MB | Airlag (talk | contribs) | figure set 1a | 1 |
| 17:37, 10 October 2019 | Airlag chess figures 20191004 185850.png (file) |  |
1.2 MB | Airlag (talk | contribs) | chess figures queen | 1 |
| 17:35, 10 October 2019 | Airlag chess figures 20191004 190002.png (file) |  |
1.24 MB | Airlag (talk | contribs) | chess figures king | 1 |
| 17:33, 10 October 2019 | Airlag chess figures 20191004 190047.png (file) |  |
1.24 MB | Airlag (talk | contribs) | chess figures knight | 1 |
| 17:32, 10 October 2019 | Airlag chess figures 20191004 190113.png (file) |  |
1.29 MB | Airlag (talk | contribs) | chess figures bishop | 1 |
| 17:31, 10 October 2019 | Airlag chess figures 20191004 190141.png (file) |  |
1.26 MB | Airlag (talk | contribs) | chess figures rook | 1 |
| 17:28, 10 October 2019 | Airlag chess figures 20191004 190213.png (file) |  |
1.2 MB | Airlag (talk | contribs) | chess figures pawn | 1 |
| 17:05, 10 October 2019 | Airlag chess figures 20191010 165559.png (file) |  |
6.24 MB | Airlag (talk | contribs) | Prototype figures first set | 1 |
| 16:13, 10 October 2019 | Airlag chess figures 20191010 152704.png (file) |  |
656 KB | Airlag (talk | contribs) | Geopolymer reference body 3 | 1 |
