File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 04:24, 3 October 2018 | Glued Laminated Timber.jpg (file) |  |
1.66 MB | Johannes (talk | contribs) | 1 | |
| 04:23, 3 October 2018 | Construction Glue.jpg (file) |  |
2.86 MB | Johannes (talk | contribs) | 1 | |
| 04:22, 3 October 2018 | Blockboard.jpg (file) |  |
1.42 MB | Johannes (talk | contribs) | 2 | |
| 21:45, 30 September 2018 | File handles 12.JPG (file) |  |
561 KB | Lukas (talk | contribs) | a self-made file handle next to an "original" one | 1 |
| 21:44, 30 September 2018 | File handles 11.png (file) |  |
2 MB | Lukas (talk | contribs) | do NOT use a hammer to drive the file into a (self-made) file handle - the hardened steel could break - but instead push it in as far as you can and then hit the workbench surface with the handle's end a few times photo edited... | 1 |
| 21:29, 30 September 2018 | File handles 10.JPG (file) |  |
395 KB | Lukas (talk | contribs) | for drilling the hole in a self-made file handle, a stepped approach may be best but a first attempt with a drill bit about half the diameter of the thickest file shaft part was also successful | 1 |
| 21:26, 30 September 2018 | File handles 09.JPG (file) |  |
449 KB | Lukas (talk | contribs) | taking a self-made file handle off the wood lathe: you could do ''some'' of the work with a parting tool, but using a sharp saw with the lathe turned off is the safest way | 1 |
| 21:23, 30 September 2018 | File handles 08.JPG (file) |  |
337 KB | Lukas (talk | contribs) | Sanding on the wood lathe is awesome! Here, a self-made file handle gets its final touch | 1 |
| 21:20, 30 September 2018 | File handles 07.JPG (file) |  |
495 KB | Lukas (talk | contribs) | now it really looks like a self-made file handle: a groove has been formed with a skew chisel where it will feel comfortable | 1 |
| 20:42, 30 September 2018 | File handles 06.JPG (file) |  |
452 KB | Lukas (talk | contribs) | the blank for a self-made file handle is taking shape after some further smoothing with a skew chisel | 1 |
| 20:35, 30 September 2018 | File handles 05.JPG (file) |  |
429 KB | Lukas (talk | contribs) | a self-made file handle in progress: after roughing out a cylinder, a parting tool is used to get the proper diameter for a ferrule | 1 |
| 20:33, 30 September 2018 | File handles 04.JPG (file) |  |
443 KB | Lukas (talk | contribs) | turning blank for a self-made file handle set up between centers on the wood lathe | 1 |
| 19:16, 30 September 2018 | File handles 03.JPG (file) |  |
509 KB | Lukas (talk | contribs) | cutting a turning blank for a self-made file handle with a Japanese saw | 1 |
| 19:13, 30 September 2018 | File handles 02.JPG (file) |  |
446 KB | Lukas (talk | contribs) | measuring the ferrule for a self-made file handle with digital calipers - here you can truly appreciate that they always take an identical measurement for inside and outside with their two pairs of probes! | 1 |
| 19:09, 30 September 2018 | File handles 01.jpg (file) |  |
951 KB | Lukas (talk | contribs) | cutting a ferrule for a self-made file handle from steel pipe with a hacksaw | 1 |
| 18:04, 30 September 2018 | File handles cover.JPG (file) |  |
459 KB | Lukas (talk | contribs) | a self-made file handle still on the wood lathe | 1 |
| 20:26, 28 September 2018 | Woodturning scraper.svg (file) |  |
7 KB | Lukas (talk | contribs) | Sketch to illustrate the geometry of a woodturning scraper (b: bevel angle). Drawn with Inkscape. | 1 |
| 20:05, 28 September 2018 | Skew chisel.svg (file) |  |
9 KB | Lukas (talk | contribs) | Sketch to illustrate the geometry of a skew chisel (b: bevel angle, s: skew angle). Drawn with Inkscape. | 1 |
| 19:40, 28 September 2018 | Spindle gouge.svg (file) |  |
8 KB | Lukas (talk | contribs) | Sketch to illustrate the geometry of a spindle gouge (b: bevel angle). Drawn with Inkscape. | 1 |
| 19:31, 28 September 2018 | Roughing gouge.svg (file) |  |
7 KB | Lukas (talk | contribs) | Sketch to illustrate the geometry of a roughing gouge (b: bevel angle). Drawn with Inkscape. | 1 |
| 19:26, 28 September 2018 | Fingernail bowl gouge.svg (file) |  |
9 KB | Lukas (talk | contribs) | square version | 2 |
| 19:25, 28 September 2018 | Bowl gouge.svg (file) |  |
9 KB | Lukas (talk | contribs) | square version | 2 |
| 10:37, 28 September 2018 | Oscillating Tool Scraper.jpg (file) |  |
1.14 MB | NitramLegov (talk | contribs) | 1 | |
| 10:36, 28 September 2018 | Oscillating Tool Saw Hard Metal.jpg (file) |  |
918 KB | NitramLegov (talk | contribs) | 1 | |
| 10:36, 28 September 2018 | Oscillating Tool Saw Fix.jpg (file) |  |
1.06 MB | NitramLegov (talk | contribs) | 1 | |
| 10:36, 28 September 2018 | Oscillating Tool Saw Changeable.jpg (file) |  |
883 KB | NitramLegov (talk | contribs) | 1 | |
| 10:35, 28 September 2018 | Oscillating Tool Sander.jpg (file) |  |
1.76 MB | NitramLegov (talk | contribs) | 1 | |
| 21:33, 27 September 2018 | VHS table 08.jpg (file) |  |
392 KB | Lukas (talk | contribs) | both VHS couch table legs finished and in front of their couch | 1 |
| 21:30, 27 September 2018 | VHS table 07.JPG (file) |  |
349 KB | Lukas (talk | contribs) | the top board of a VHS couch table leg is made of two carefully laid out pieces to give a bit of extra stability from the inside and let each leg double as a side table when the large top is removed | 1 |
| 21:27, 27 September 2018 | VHS table 06.jpg (file) |  |
435 KB | Lukas (talk | contribs) | finished tape assembly for a VHS couch table leg | 1 |
| 21:25, 27 September 2018 | VHS table 05.JPG (file) |  |
447 KB | Lukas (talk | contribs) | to connect the different layers of VHS couch table legs with rivets, makeshift brackets out of some surplus tapes proved efficient (and nearly invisible in the end) | 1 |
| 21:21, 27 September 2018 | VHS table 04.JPG (file) |  |
483 KB | Lukas (talk | contribs) | Fifth and most complicated layer of a VHS couch table leg: two sets of two sandwiched tapes and four single ones standing on their short edge, forming something like a rectangle. This weird arrangement was necessary to gain... | 1 |
| 21:20, 27 September 2018 | VHS table 03.JPG (file) |  |
506 KB | Lukas (talk | contribs) | third and fourth layer of a VHS couch table leg: two tapes lying flat (they will be hidden later, don't choose your favorite ones) on top of another ring as was also used for the second layer | 1 |
| 21:18, 27 September 2018 | VHS table 02.JPG (file) |  |
558 KB | Lukas (talk | contribs) | the second layer of a VHS couch table leg: four tapes on their long edge (labels nicely visible!) | 1 |
| 21:18, 27 September 2018 | VHS table 01.JPG (file) |  |
507 KB | Lukas (talk | contribs) | assembling four VHS tapes in a square with a rivet gun - this will be the base of a couch table leg | 1 |
| 17:43, 20 September 2018 | Coming soon.svg (file) |  |
3 KB | Lukas (talk | contribs) | placeholder for missing project photos, e.g. on your user page quickly created with Inkscape. | 1 |
| 02:47, 15 September 2018 | Zentrierbohrer.jpg (file) |  |
2.62 MB | Johannes (talk | contribs) | 1 | |
| 02:34, 15 September 2018 | Rollkörnerbild1.jpg (file) |  |
2.54 MB | Johannes (talk | contribs) | 1 | |
| 02:33, 15 September 2018 | Rollkörnerbild2.jpg (file) |  |
2.73 MB | Johannes (talk | contribs) | 1 | |
| 02:17, 15 September 2018 | Drehmeißel eingespant.jpg (file) |  |
2.94 MB | Johannes (talk | contribs) | 1 | |
| 01:17, 15 September 2018 | Lathe Drehmeißelaufnahme.jpg (file) |  |
1.41 MB | Johannes (talk | contribs) | 1 | |
| 01:14, 15 September 2018 | Lathe Tool bild 1.jpg (file) |  |
2.99 MB | Johannes (talk | contribs) | 1 | |
| 00:08, 15 September 2018 | Twist Drill Bits.jpg (file) |  |
2.87 MB | Johannes (talk | contribs) | 1 | |
| 18:54, 12 September 2018 | Tacklife PAH01D.JPG (file) |  |
4.09 MB | Lukas (talk | contribs) | Tacklife PAH01D welding helmet sitting on its bag | 1 |
| 18:10, 5 August 2018 | Sticky, stringy.jpg (file) |  |
671 KB | Lukas (talk | contribs) | pulling on some old adhesives holding a machine's feet | 1 |
| 15:24, 5 August 2018 | Patricks Locker divider 4.jpg (file) |  |
1.59 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 15:23, 5 August 2018 | Patricks Locker divider 3.jpg (file) |  |
1.43 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 15:20, 5 August 2018 | Patricks Locker divider 2.jpg (file) |  |
1.44 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 15:19, 5 August 2018 | Patricks Locker divider 1.jpg (file) |  |
1.55 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 15:11, 5 August 2018 | Patricks Locker current.jpg (file) |  |
1.89 MB | Pakue (talk | contribs) | The current state of the Project:Patricks_Locker. | 1 |
