Project:Router Table: Difference between revisions

From CoMakingSpace Wiki

(started a safety section)
Line 27: Line 27:
* [https://www.youtube.com/watch?v=hUpXkMbogIc demonstration of a very simple bench mounted one] with general tips & tricks for working with a router table
* [https://www.youtube.com/watch?v=hUpXkMbogIc demonstration of a very simple bench mounted one] with general tips & tricks for working with a router table
* Steve Ramsey's [https://www.youtube.com/watch?v=Gf5tRp35EEU router table] and [https://www.youtube.com/watch?v=QfjeS5jolBs router lift]
* Steve Ramsey's [https://www.youtube.com/watch?v=Gf5tRp35EEU router table] and [https://www.youtube.com/watch?v=QfjeS5jolBs router lift]
== Safety ==
'''Only push cuts''' should be done on a router table, otherwise workpieces will start flying...
We need to make various guidance jigs and [[Push Sticks|push sticks]]/blocks once the table takes shape, and include clear direction markers to reduce the chance of accidental climb cuts happening. However, the proper direction can be less clear when the cut is inside the workpiece instead of along its edge!<sup> [https://www.finewoodworking.com/2014/05/07/router-accident-is-a-great-lesson-in-climb-cutting]</sup>




[[Category:Self-Made Tools]]
[[Category:Self-Made Tools]]
[[Category:Woodworking]]
[[Category:Woodworking]]

Revision as of 07:26, 5 June 2018

ProjectInfoBox

Building a Router Table

Project-default.png
Status: planning
Initiator: Mitja, Lukas
Team: who else would like to help?
Materials Used: probably mostly plywood


A powerful router is heavy and too dangerous to be used on any boards narrower than its base. We want to build a table where the router is mounted upside down so the wood can be fed through (a similar principle as with a table saw vs. a handheld circular saw).

Planning

The table needs to be sturdy for a safe operation but also adjustable for the many use cases.

Location

Somewhere in the wood workshop - could perhaps be integrated into a large enough table saw and use the same fence!

Build

If you find promising designs online, please link them here! Lukas also has a woodworking magazine (HolzWerken) with plans for a small table which could be used as inspiration.

Safety

Only push cuts should be done on a router table, otherwise workpieces will start flying...

We need to make various guidance jigs and push sticks/blocks once the table takes shape, and include clear direction markers to reduce the chance of accidental climb cuts happening. However, the proper direction can be less clear when the cut is inside the workpiece instead of along its edge! [1]