Water Chiller: Difference between revisions
Created page with "{{MachineInfoBox |machine name=CW4000 |image= |synonyms=DE: Wasserkühlung |type=laser cutter periphery |material= |location=Location::Electronics Room|eRoo..." |
error messages |
||
Line 29: | Line 29: | ||
* refrigerant: R134a | * refrigerant: R134a | ||
* tubing: Rp 1/2 (DN15) | * tubing: Rp 1/2 (DN15) | ||
== Error Messages == | |||
* E02: temperature error | |||
** room/water below 5 or above 25°C? | |||
* E05: flow restriction | |||
** bends in the tubing? | |||
** water level too low? |
Revision as of 23:11, 12 March 2020
MachineInfoBox CW4000 | |
---|---|
![]() | |
Synonyms: | DE: Wasserkühlung |
Access Requirements: | The query description has an empty condition.Property "Needs Introduction" (as page type) with input value "The query description has an empty condition." contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. |
Tutors: | The query description has an empty condition. |
... further resultsProperty "Has caption" (as page type) with input value "Vertical Bandsaws, Vertical Bandsaws, CNC Router, Mechanical Hand Tool, 3D Printers, 3D Printers, 3D Printers, 3D Printers, 3D Printers, 3D Printers, Oscilloscope, Oscillating Tool, Multimeter, Chop Saw, Wanted:Handheld Belt Sander, Bench Grinders, Bench Grinders, Table Saw, Handheld Circular Saws, Dust Extractors, Dust Extractors, Biscuit Joiner, Chop Saw, Handheld Circular Saws, CNC Router, Compressor, Archived:Corded Drills, Archived:Corded Drills, Cordless Drills, Cordless Disc Grinder, Cordless Drills, Jigsaws, Vice, Lab Power Supplies, Lab Power Supplies, Corded Disc Grinder, Corded Disc Grinder, Wood Lathes, CNC Mill, Wood Lathes, Laser Cutter, Eccentric Sanders, Kitchen Equipment, Chop Saw, Wood Lathe Accessory, Laser Printers, Audio Equipment, Audio Equipment, Wood Lathe Accessory, Wood Lathe Accessory[[:Special:Ask/-5B-5BHas-20Internal-20AssetID::+-5D-5D/-3FHas-20Internal-20Category/mainlabel=-2D/limit=50/offset=50/format=plainlist/link=none/headers=hide/default=Water-20Chiller" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process."{{{assetid}}}" is not a number.|]]
We have a "CW4000" water chiller that is dedicated to the laser cutter.
Never fire up the laser without proper cooling!
Filling
The unit is filled from the top where you can remove the clear plastic lid. If the temperature may drop below 5°C the laser cutter's manual advises the use of company-approved antifreeze (NOT the stuff for cars, apparently it can break the tubing and seals!). Pending first experiences, we may also need to think about an additional sterilizing agent in case algae or fungi start feeling at home in the water...
1st fill: just distilled water, 2020-3-12
Specs
From the HPC product page:
- tank volume: 3.2 L
- refrigerant: R134a
- tubing: Rp 1/2 (DN15)
Error Messages
- E02: temperature error
- room/water below 5 or above 25°C?
- E05: flow restriction
- bends in the tubing?
- water level too low?