Handheld Routers: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) m (Removed the link to the manual in the text due to now havin two routers with different manuals.) |
m (removed copy-pasted tutors) |
||
| Line 7: | Line 7: | ||
|location=[[Wood Workshop]] | |location=[[Wood Workshop]] | ||
|material=[[wood]] | |material=[[wood]] | ||
|tutors= | |tutors= | ||
|manual=[http://doc.ferm.com/item/P/PRM1005/PRM1005_MANUAL.pdf pdf] | |manual=[http://doc.ferm.com/item/P/PRM1005/PRM1005_MANUAL.pdf pdf] | ||
|similar=[[CNC Router|CNC router]], [[Router Plane|router plane]]; [[Milling Table|milling table]], [[CNC Mill|CNC mill]] | |similar=[[CNC Router|CNC router]], [[Router Plane|router plane]]; [[Milling Table|milling table]], [[CNC Mill|CNC mill]] | ||
Revision as of 09:35, 25 June 2018
| ToolInfoBox Ferm FBF-1050E | |
|---|---|
| |
| Synonyms: | DE: Oberfräse |
| Type: | power tool |
| Material: | wood |
| Location: | Wood Workshop |
| Access Requirements: | upon introduction |
| Manual: | |
| Similar (More or Less): | CNC router, router plane; milling table, CNC mill |
A router is basically a powerful motor spinning a sharp metal bit at high speeds. Read the manual before using and be aware of the difference between the regular "push" and the more dangerous "climb" cut!
Safety
When using a router, always take the time to properly clamp down your workpiece, hook up a shop vac and wear safety goggles.
Router Bits
Router bits can get quite expensive, but good quality ones can be sharpened when they become dull.
The router comes with 6 and 8 mm collets (Spannzangen).
A set of router bits is available with the router. As always, report when broken and replace them accordingly.
Future Plans
- router table
- 3D copying jig
- "Pantorouter" guidance jig
Links
- "Router 101" video by "BrainFizz" - 35 minutes packed with valuable information
- video tutorial on feed direction by "StumpyNubs"
| ToolInfoBox Einhell TE-RO 1255 E | |
|---|---|
| |
| Synonyms: | DE: Oberfräse |
| Type: | power tool |
| Material: | wood |
| Location: | Mitja's CoMaking bench |
| Access Requirements: | upon request & personal introduction |
| Tutors: | Mitja |
| Manual: | |
| Similar (More or Less): | CNC router, router plane; milling table, CNC mill |
