Belt and Disc Sander

Holzmann BT 203_914

This machine will sit in the metal workshop, next the the grinding stones on a wooden box containing the manual and assessories after commissioning.

It is a combined disc and belt sander with a 200mm rough sanding disc and a 914x100mm belt sander. Both are always simultaneously driven by the 550W motor. Belt speed is 9,5m/s and disc speed is 2850 min-1.

This type of machine is helpful for all sanding tasks that require a fixed angle. Both sander sides have adjustable sanding tables and a slot for a miter gauge to guide your workpiece in a defined agle against the sanding disc or belt.

MachineInfoBox Holzmann BT 203_914
Used with:	914x100mm sanding belts
Access Requirements:	Stationary Sander Introduction
Manual:	in wooden box below grinder
Tutors:	Lukas Pakue Johannes Luzian Utis Sebastian Jakob

This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task	comment	Status
Name the tool:	-	done
Take a picture	-	pending
Find the manual as PDF	no pdf found	in wooden box below sander
Documentation	this page, status: in commissioning	pending
Print QR-Code	use the wikicrawler	pending
Introduction	Belt and Disc Sander Introduction	pending
Security Check	to be done or witnessed by a manager	pending
Test	to be done or witnessed by a manager	pending
tool's name, owner and approx. value	provide to Patrick for inventorization	pending
Last step: make it available	physically and in the wiki - then delete this template	pending