Wish List: Difference between revisions

From CoMakingSpace Wiki

← Older edit
Visual
Pakue (talk | contribs)
899 edits
→Metalworking: Flexarm
MobiTobi (talk | contribs)
102 edits
added electronics pliers to wish list
 
(75 intermediate revisions by 11 users not shown)
Line 1: Line 1:
A list of gadgets we would like to use in the near future. If you have additional ideas, please add them!  
A list of gadgets we would like to use in the near future. If you have additional ideas, please add them!  
'''For small things, e.g. consumables, we sometimes organize group orders - see "[[Centralized Buying]]"!'''


A good way to make sure something can actually be purchased is to create a page for that item and link it to the entry in this list. That way, we can keep the list neat while accumulating enough knowledge and specific suggestions to make an informed decision what to spend money on. Pages for equipment we don't have yet are in the [[Special:AllPages/Wanted:|"Wanted" namespace]].
A good way to make sure something can actually be purchased is to create a page for that item and link it to the entry in this list. That way, we can keep the list neat while accumulating enough knowledge and specific suggestions to make an informed decision what to spend money on. Pages for equipment we don't have yet are in the [[Special:AllPages/Wanted:|"Wanted" namespace]].
Line 6: Line 8:


== Miscellaneous ==
== Miscellaneous ==
* screen printing equipment (can be self-built)
* Bend wire, place parts, adjust component legs. Our electronics corner lacks pliers! There are more fancy options, but these work really well fine. (The 4mm tip as also amazing for removing brims from Gridfinity prints)
** [https://www.knipex.de/produkte/elektronikzangen/elektronik-greifzangen-mit-durchgestecktem-gelenk/elektronik-greifzangen-mit-durchgestecktem-gelenk/3521115 Präzisions Greifzange für feine Montagearbieten]
** [https://www.knipex.de/produkte/elektronikzangen/elektronik-greifzangen-mit-durchgestecktem-gelenk/elektronik-greifzangen-mit-durchgestecktem-gelenk/3511115 Greifzange 4mm Spitze]
** [https://www.knipex.de/produkte/elektronikzangen/elektronik-greifzangen-mit-durchgestecktem-gelenk/elektronik-greifzangen-mit-durchgestecktem-gelenk/3531115 Greifzange 1.5mm Spitze]
* Oven Thermometer
** reproducible tempering and thermoforming relies on measuring the oven temperature
** should be easy to read, low precision suffices
** [https://www.amazon.de/dp/B00B8OAY9O less than 10 Euro from amazon]
 
* thermometer with probe
** control the temperatures of solutions and thermoplastics
** [https://www.hornbach.de/p/tenneker-digital-fleischthermometer-grillthermometer-kuechenthermometer-ofenthermometer-7-3-x-7-3-x-2-5-cm-abs-weiss/10139284/ hands-free version 15 Euro Hornbach] (can also be used in the oven)
** [https://www.hornbach.de/p/tenneker-grillthermometer-digitales-taschenthermometer/6139904/ handhelt version 10 Euro Hornbach]
* digital timer
** reproducible curing, tempering, etching, cooling, heating ....
** smartphones are not an adequate alternative. They clash with protective equipment  ⚠️ and are fragile to heat, corrosion 💥
** [https://www.amazon.de/digital-Stoppuhr-Countdown-Countup-kurzzeitmesser/dp/B099RYJ9KM/ four for 10 Euro] at amazon
** [https://www.galaxus.de/en/s2/product/westmark-digital-timer-10882280-kitchen-timers-22815071 one for 10 Euro at] Galaxus
* [[scalpels]]
* [[Screen Printing|screen printing]] equipment (can be self-built)
* Makelangelo art robot (actually more of a project idea)
* Makelangelo art robot (actually more of a project idea)
* 3D mouse, e.g. [http://www.3dconnexion.de/products/spacemouse.html SpaceMouse]
* glass/ceramic ring saw ([http://www.glass-fusing-made-easy.com/glass-ring-saw.html short review with funny video])
* glass/ceramic ring saw ([http://www.glass-fusing-made-easy.com/glass-ring-saw.html short review with funny video])
* whetstone(s)
* whetstone(s) ([[:Category:Sharpening]])
* [[Machine Vises|machine vises]]
* assortment of [[Material:Aluminum Extrusions|aluminum extrusions]]
* assortment of [[Material:Aluminum Extrusions|aluminum extrusions]]
* air compressor - large and noisy, but great for cleaning (and flat tires)
* [https://www.wiha.com/de/produkte/drehmomentwerkzeuge/drehmoment-schraubendreher-set-torquevario-s-gemischt-13-tlg-variabel-einstellbare-drehmomentbegrenzung-in-box-26893.html variable torque screwdriver set] [broken link]


== [[Woodworking]] ==
== [[Woodworking]] ==
* [[Wanted:Belt Sander|belt sander]]
 
* [[Wanted:Rotary Tool|rotary tool]] and bits
=== Sanding ===
* pipe clamps
* Handheld [https://www.amazon.de/Handschleifteller-verstellbarer-Handschlaufe-Klett-Schleifscheiben-125mm/dp/B00IUPGZWY sanding disc holder]
* [[Wanted:Jointer|jointer]]
 
=== Sawing ===
 
* vertical panel saw ''(Plattensäge)'' - simple version could be self-built for a handheld circular saw
 
=== Drilling ===
* [[Wanted:Pocket Hole Jig|pocket hole jig]] (e.g. [https://www.planetahuerto.de/do-it-yourself/verbrauchsmaterial-zubehor/verbindungsschrauben/undercover-jig-set-wolfcraft_13007?gclid=CMGT06vJstACFeoK0wodWRAHqg this one] or [https://www.kregtool.com/store/c13/kreg-jigsreg/p362/kreg-jigreg-k5-master-system/ more elaborate system]; or self-built?)
* [[Wanted:Pocket Hole Jig|pocket hole jig]] (e.g. [https://www.planetahuerto.de/do-it-yourself/verbrauchsmaterial-zubehor/verbindungsschrauben/undercover-jig-set-wolfcraft_13007?gclid=CMGT06vJstACFeoK0wodWRAHqg this one] or [https://www.kregtool.com/store/c13/kreg-jigsreg/p362/kreg-jigreg-k5-master-system/ more elaborate system]; or self-built?)
* [https://www.amazon.de/Handschleifteller-verstellbarer-Handschlaufe-Klett-Schleifscheiben-125mm/dp/B00IUPGZWY sanding disc holder]
*[https://www.feinewerkzeuge.de/zapfenschneider.html#ziel307820 "Zapfen-/Scheibenschneider"]
* high-end [[Wanted:Hole Saws|hole saws]] (or "Zapfen-/Scheibenschneider")
 
* [http://www.sawstop.com/support/product-comparison SawStop] table saw (2000 € or more, does not seem to be available in Europe...)
=== Routing ===
* disc sander (can be self-built from simple parts)
* [[Shaper Origin]] handheld CNC router
* band saw
** accessories like Shaper Workstation save marking tape in the long run, but could be added later
* woodturning lathe
 
=== CNC Routing ===
 
* [[CNC Router|CNC router]] accessories
** tool changer
** tool length sensor
** aluminum t-slot bed
** vacuum table
** eccentric nuts for fixing small workpieces to the CNC table
 
=== Woodturning ===
* dedicated slow-running bench grinder for woodturning tools, e.g. [https://www.dictum.com/de/schaerfmaschinen-efb/dictum-langsamlaeufer-ds-150-l-mit-dictum-cbn-schleifscheibe-711241?c=313 Dictum DS 150 L]
** can permanently be fitted with the [[Wolverine Jig]] as there is no risk of water damage
* [https://www.rockler.com/sorby-calipers more turning calipers]
** what we already have: --> [[Turning Calipers]]
 
=== General Woodworking ===
* ''[https://www.dictum.com/de/blog/tutorials/kurzanleitung-hobellade-mit-gehrungseinsatz-und-praezisions-gehrungslade Stoßlade (Eigenbau) mit passendem Flachwinkelhobel] für präzise Gehrungen''
* [[Handheld Planer|handheld planer]] for workpieces that are too large for our [[Jointer-Planer|jointer-planer]]
*[https://www.shopbox24.de/bessey-rohr-schraubzwinge-faeuer-rohre-26-9-mm-3/4-durchmesser-bpc-h34/a-139851/ pipe clamps]
** Sebastian donated a few! Let's see if we need more...
** alternatively [https://www.feinewerkzeuge.de/tuerenspanner.html ''Türenspanner''], probably useful for the same projects but not as expandable


== [[Metalworking]] ==
== [[Metalworking]] ==
* hand-held band saw
* welding screens
* smelting furnace (can be self-built, mainly need the gas burner)
* metalworking lathe
* [https://www.amazon.de/gp/product/B001ILF7U8/ tap holder]
* [[Taps and Dies|taps and dies]] for left-handed threads
* [[Taps and Dies|taps and dies]] for left-handed threads
* bigger/better drill press
* magnetic drill ([https://en.m.wikipedia.org/wiki/Magnetic_drilling_machine Wikipedia])
** e.g. crank for height adjustment, higher pillar, deeper work area
* [http://www.flexarminc.com/index.html tap arm]
* drilling/cutting oils
* Sheet metal bender (could possibly be self-built)
* [tap arm http://www.flexarminc.com/index.html]
* plasma cutter
** '''not''' Parkside ;-)
*[[Wanted:Belt Grinder|Beltgrinder]] with 50x2000mm
 
==[[e.Room|Electronics Room]]==


== [[e.Room]] ==
=== Electronics / PCB ===
* [https://www.amazon.de/dp/B0728HZHTR/?coliid=I419LYKTYY4TK&colid=1BZW9FD6BU4T1&psc=0&ref_=lv_ov_lig_dp_it PCB prototyping boards]
* coaxial cables
* coaxial to banana cables
* banana cable to breadboard connector
* programmable power supply (multi channel)
* programmable power supply (multi channel)
* digital function generator
* PCB holder
* PCB etching machine
* PCB etching machine
* microscope for PCB inspection
* microscope for PCB inspection
* thermal imager
* thermal imager
* isolation transformer
* [https://eleshop.de/desolderingstation-zd-915.html Desoldering Gun]


=== 3D Printing ===
=== Laser Cutting ===
* 4" lens for cutting thicker materials
* rotary attachment for engraving glasses, bottles etc.
* Upgraded laser cutter control board
== [[CNC]] ==
== [[CNC]] ==
* [[Wanted:Laser Cutter|laser cutter]]
** 4" lens for cutting thicker materials
** rotary attachment for engraving glasses, bottles etc.
* waterjet cutter, e.g. [https://www.wazer.com/pages/home/#buy-wazer Wazer] (also see [http://makezine.com/2016/09/13/wazer-desktop-waterjet-cutter/ Makezine article])
* waterjet cutter, e.g. [https://www.wazer.com/pages/home/#buy-wazer Wazer] (also see [http://makezine.com/2016/09/13/wazer-desktop-waterjet-cutter/ Makezine article])
* CNC metalworking lathe
 
* milling accessories
== Plastics ==
** tool changer
 
** tool length sensor
* ''see [[Precious Plastic]]''
** aluminum t-slot bed
*[[Wanted:Filament Extruder|filament extruder]]
** vacuum table
** eccentric nuts for fixing small workpieces to the CNC table
* [[Wanted:Filament Extruder|filament extruder]]




[[Category:3D Printing]]
[[Category:CNC]]
[[Category:Electronics]]
[[Category:Hardware]]
[[Category:Hardware]]
[[Category:Metalworking]]
[[Category:Woodworking]]

Latest revision as of 13:42, 25 April 2025

A list of gadgets we would like to use in the near future. If you have additional ideas, please add them!

For small things, e.g. consumables, we sometimes organize group orders - see "Centralized Buying"!

A good way to make sure something can actually be purchased is to create a page for that item and link it to the entry in this list. That way, we can keep the list neat while accumulating enough knowledge and specific suggestions to make an informed decision what to spend money on. Pages for equipment we don't have yet are in the "Wanted" namespace.

Do you happen to know a good source for any of these items, or want to get rid of something yourself? Please let us know!

Miscellaneous

Woodworking

Sanding

Sawing

  • vertical panel saw (Plattensäge) - simple version could be self-built for a handheld circular saw

Drilling

Routing

  • Shaper Origin handheld CNC router
    • accessories like Shaper Workstation save marking tape in the long run, but could be added later

CNC Routing

  • CNC router accessories
    • tool changer
    • tool length sensor
    • aluminum t-slot bed
    • vacuum table
    • eccentric nuts for fixing small workpieces to the CNC table

Woodturning

General Woodworking

Metalworking

Electronics Room

Electronics / PCB

  • PCB prototyping boards
  • coaxial cables
  • coaxial to banana cables
  • banana cable to breadboard connector
  • programmable power supply (multi channel)
  • PCB etching machine
  • microscope for PCB inspection
  • thermal imager
  • Desoldering Gun

3D Printing

Laser Cutting

  • 4" lens for cutting thicker materials
  • rotary attachment for engraving glasses, bottles etc.
  • Upgraded laser cutter control board

CNC

Plastics

Retrieved from "https://wiki.comakingspace.de/index.php?title=Wish_List&oldid=19533"