Compressor Introduction: Difference between revisions
From CoMakingSpace Wiki
m (Tutor Patrick (according to Webling)) |
(no waiting list necessary) |
||
Line 36: | Line 36: | ||
== Further Reading == | == Further Reading == | ||
* [https://www.schreiner-abz.ch/site/assets/files/1024/suvapro_druckluft_die_unsichtbare_gefahr-komprimiert.pdf ''"Druckluft - die unsichtbare Gefahr" (PDF, DE)''] | * [https://www.schreiner-abz.ch/site/assets/files/1024/suvapro_druckluft_die_unsichtbare_gefahr-komprimiert.pdf ''"Druckluft - die unsichtbare Gefahr" (PDF, DE)''] | ||
[[Category:Introductions]] | [[Category:Introductions]] |
Revision as of 11:21, 25 September 2022
This is the content required for an introduction to our compressor - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
If you need this introduction, please reach out to the following tutors: Lukas, Luzian, Martin, Patrick
Let's begin! First off, make sure you have read the machine's manual.
Safety
Dangers | Precautions |
---|---|
compressed air is generated and released through the connected accessories:
|
|
filling unsuitable containers with compressed air can cause them to explode | do not fill any containers (tires etc.) if they appear damaged, and never above their pressure rating |
a bubble of air in the bloodstream can kill you | do not use if you have any open wounds |
no prevention of turning on after loss & restoration of power (keine Anlaufsicherung) | if the power has been lost for whatever reason, always press the orange button into the "off" position before restoring it! |
parts of the machine may become hot during operation | to avoid burns, don't touch any motor parts if the compressor is or has been running in the last 15 minutes |
Practical Demonstration
- connecting and disconnecting the couplings
- setting a defined pressure, e.g. 4 bar for bike tires or the blast cabinet