User:Lukas/Bench: Difference between revisions
From CoMakingSpace Wiki
(→Understructure: stretchers) |
NitramLegov (talk | contribs) m (It´s located in the office :-D) |
||
| (4 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
''"Private" page about my | ''"Private" page about my workbench - feel free to read on, but it's more of a note to myself than something I would expect to be interesting ;-)'' | ||
The bench will be a [[Project:Roubo Workbench|Roubo style workbench]] and set up in the [[office]]. It will be made out of Douglas fir planks and end up about 1.5 m wide to fit into "my" corner. | The bench will be a [[Project:Roubo Workbench|Roubo style workbench]] and set up in the [[office]]. It will be made out of Douglas fir planks and end up about 1.5 m wide to fit into "my" corner. | ||
== Walls == | == Walls == | ||
* | * back: ''two shelves'' | ||
* sideboard: | * sideboard: 150{{x}}120{{x}}2 cm plywood for hanging tools | ||
== Top == | == Top == | ||
| Line 13: | Line 13: | ||
** a [[Biscuit Joiner|biscuit joiner]] would have helped with the glue-up - without it, some boards slipped | ** a [[Biscuit Joiner|biscuit joiner]] would have helped with the glue-up - without it, some boards slipped | ||
* 3 [[Sliding Dovetails|sliding dovetails]] (''Gratleisten'') to prevent warping, made of oak | * 3 [[Sliding Dovetails|sliding dovetails]] (''Gratleisten'') to prevent warping, made of oak | ||
** right one | ** left one was loose by Dec 2019 | ||
** right one may interfere with tail vise... | |||
== Understructure == | == Understructure == | ||
| Line 39: | Line 40: | ||
** would there be enough flush space left for planing? | ** would there be enough flush space left for planing? | ||
** perhaps the vise could be screwed off whenever that much space is actually required | ** perhaps the vise could be screwed off whenever that much space is actually required | ||
* [http://www.holzwerken.net/Wissen/Tipps-Tricks/Tischlern/Halt-beim-Hobeln-Fest-aber-flexibel planing jig to be held in a vise] | |||
== Further Inspiration/Research == | == Further Inspiration/Research == | ||
| Line 50: | Line 52: | ||
** [https://www.youtube.com/watch?v=kexMm4JTa78 upgrades after some time of using it] (especially interesting part about the leg vise) | ** [https://www.youtube.com/watch?v=kexMm4JTa78 upgrades after some time of using it] (especially interesting part about the leg vise) | ||
* [https://www.youtube.com/watch?v=PwLY-zbqA2g how to flatten a workbench top with handplanes] | * [https://www.youtube.com/watch?v=PwLY-zbqA2g how to flatten a workbench top with handplanes] | ||
[[Location::Office| ]] | |||
[[Category:Facilities]] | |||
Latest revision as of 19:44, 29 August 2022
"Private" page about my workbench - feel free to read on, but it's more of a note to myself than something I would expect to be interesting ;-)
The bench will be a Roubo style workbench and set up in the office. It will be made out of Douglas fir planks and end up about 1.5 m wide to fit into "my" corner.
Walls
- back: two shelves
- sideboard: 150 × 120 × 2 cm plywood for hanging tools
Top
- laminated douglas fir Glattkantbretter
- 300 × 14.4 × 2.7 cm boards cut in half two times (across & lengthwise) -> top approx. 150 × 75 × 7 cm
- not jointed as we didn't have the equipment yet - top planed by hand after assembly
- a biscuit joiner would have helped with the glue-up - without it, some boards slipped
- 3 sliding dovetails (Gratleisten) to prevent warping, made of oak
- left one was loose by Dec 2019
- right one may interfere with tail vise...
Understructure
- legs consist of three laminated douglas fir Glattkantbretter
- final size: 14.5 × ? × ? cm
- stretchers for stability & straight legs
- four horizontal ones near the bottom
- will also hold a simple storage shelf
- front sunk into the legs as a dovetail, sides & back just screwed on for now (don't need to be flush)
- perhaps also add diagonals on the sides?
- four horizontal ones near the bottom
Planned Features
- woodworking vise - on the right face, as tail vise? front should ideally be flush for planing
- 3/4" holes for holdfasts or bench dogs
- some in the top (one row in the woodworking vice's direction for sure), some in the legs
- exact layout TBD, can be drilled as the need becomes clear
- plane stop on the far left (far enough from the wall to pull through with each plane)
- storage options: just some "floor" for now
- perhaps (partial!) cabinet/drawers later
- or a second floor, with a cut-out to allow comfortable sitting at the bench?
- sliding deadman with further dog holes to support large pieces that need planing on their edges?
- horizontal twin screw ("Moxon") vise - non-permanent to leave room in the front?
- tool well? could fill gap on the back left (obstacle on the right that prevents the bench to be fully against the wall)
- leg vise on the right?
- would there be enough flush space left for planing?
- perhaps the vise could be screwed off whenever that much space is actually required
- planing jig to be held in a vise
Further Inspiration/Research
- Stumpy Nubs' Roubo Workbench
- similar top & leg lamination with mortises/tenons cut before the glue-up; I left out the threaded rods though (used them in my first Roubo Workbench)
- Jay Bates' southern yellow pine workbench - only found after all the main decisions where made, but luckily in agreement with my wood choice:
- "Softwood Workbench VS Hardwood Workbench"
- basic build video
- adding vises - nice DIY leg & parallel vise (although with American hardware)
- adding a storage cabinet
- upgrades after some time of using it (especially interesting part about the leg vise)
- how to flatten a workbench top with handplanes
