Screwdriver Bits: Difference between revisions
m (Category:Repair) |
(better photo, list hidden until updated) |
||
| Line 1: | Line 1: | ||
{{ToolInfoBox | {{ToolInfoBox | ||
|tool name=Screwdriver Bits | |tool name=Screwdriver Bits | ||
|image= | |image=screwdriver bit organizers.JPG | ||
|synonyms=DE: Schraubeinsätze, Schrauberbits | |synonyms=DE: Schraubeinsätze, Schrauberbits | ||
|type=bit | |type=bit | ||
|access= | |access=upon reading | ||
|location= | |location=above [[Drilling Table|drilling table]] | ||
|material=[[screws]] | |material=[[screws]] | ||
}} | }} | ||
[[File:Makita screwdriver bit set.JPG|thumb|right|our set of bits for typical [[Wood Screws|wood screws]]]] | |||
Screwdriver [[bits]] are interchangeable tips for [[Screwdrivers#Hex Bit Screwdrivers|hex bit screwdrivers]]. You can use them with a [[Cordless Drills|cordless drill]] but '''not with the [[Drill Press|drill press]]''' as this applies way too much torque and speed! The cordless drill should always be used with medium to low torque setting and a low speed (1st gear) at least at the beginning. | Screwdriver [[bits]] are interchangeable tips for [[Screwdrivers#Hex Bit Screwdrivers|hex bit screwdrivers]]. You can use them with a [[Cordless Drills|cordless drill]] but '''not with the [[Drill Press|drill press]]''' as this applies way too much torque and speed! The cordless drill should always be used with medium to low torque setting and a low speed (1st gear) at least at the beginning. | ||
| Line 15: | Line 16: | ||
These are the "typical" screwdriver bits you probably know from your own toolbox. The list below mostly contains the ones from the "grey bit set" - quantities may not interest you, but here you can quickly check whether a special drive is available or whether you should bring (or [[donate]]) that bit yourself! | These are the "typical" screwdriver bits you probably know from your own toolbox. The list below mostly contains the ones from the "grey bit set" - quantities may not interest you, but here you can quickly check whether a special drive is available or whether you should bring (or [[donate]]) that bit yourself! | ||
''The list is currently out of date but will be back soon :-)'' | |||
<!-- | |||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|- | |- | ||
| Line 442: | Line 445: | ||
| 1x short | | 1x short | ||
|} | |} | ||
--> | |||
=== Bit Holders === | === Bit Holders === | ||
Revision as of 23:50, 5 November 2018
| ToolInfoBox Screwdriver Bits | |
|---|---|
| |
| Synonyms: | DE: Schraubeinsätze, Schrauberbits |
| Type: | bit |
| Material: | screws |
| Location: | above drilling table |
| Access Requirements: | upon reading |
Screwdriver bits are interchangeable tips for hex bit screwdrivers. You can use them with a cordless drill but not with the drill press as this applies way too much torque and speed! The cordless drill should always be used with medium to low torque setting and a low speed (1st gear) at least at the beginning.
When mounting long bits (or short bits with a bit holder) into a chuck, make sure that the chuck teeth are centered on the flat sides of the bit when tightened or you will lose or damage the bit.
1/4" Hex Drive Bits
These are the "typical" screwdriver bits you probably know from your own toolbox. The list below mostly contains the ones from the "grey bit set" - quantities may not interest you, but here you can quickly check whether a special drive is available or whether you should bring (or donate) that bit yourself!
The list is currently out of date but will be back soon :-)
Bit Holders
Bit holders (DE: Bithalter) are necessary to mount short-shaft bits into a power driver such as a cordless drill but may also add functionality to a handheld bit screwdriver. For instance, there are quick-release holders, such with a strong magnet for one-handed operation, and simple extension pieces without any extras.
