Project:Roubo Workbench: Difference between revisions
From CoMakingSpace Wiki
(Created page with "thumb|right|drilling holes for the threaded rods with a simple fixture A "Roubo" workbench seems to be the American version of a traditiona...") |
m (categorized) |
||
| Line 8: | Line 8: | ||
** not [[Jointer|jointed]] - glue reinforced by three M8 [[Threaded Rods|threaded rods]] | ** not [[Jointer|jointed]] - glue reinforced by three M8 [[Threaded Rods|threaded rods]] | ||
** 10 mm holes for the rods, outmost planks counterbored with 20 mm [[Forstner Bits|Forstner bit]] to receive [[nuts]] | ** 10 mm holes for the rods, outmost planks counterbored with 20 mm [[Forstner Bits|Forstner bit]] to receive [[nuts]] | ||
[[Category:Woodworking]] | |||
[[Category:Workbenches]] | |||
Revision as of 23:08, 28 September 2017
A "Roubo" workbench seems to be the American version of a traditional woodworking bench (Hobelbank). It has many nice features and work holding options so we began building one.
Notes
- final plate size: 1800 × 800 × 60 mm
- made of ten 2000 × 80 × 60 mm planks
- not jointed - glue reinforced by three M8 threaded rods
- 10 mm holes for the rods, outmost planks counterbored with 20 mm Forstner bit to receive nuts
