Project:Plastic Beam Forming: Difference between revisions
From CoMakingSpace Wiki
(→Open Mold Method: some missing parameters) |
|||
| Line 35: | Line 35: | ||
|- | |- | ||
|welded steel | |welded steel | ||
|50{{x}} | |50{{x}}4{{x}}2 cm | ||
|[[PP]] | |[[PP]] | ||
| | |350 | ||
|240 | |240 | ||
|?? min baking pan; ?? min mold | |approx. 2 h (?? min baking pan; ?? min mold) | ||
|49{{x}}?{{x}}? cm | |49{{x}}?{{x}}? cm | ||
|near the [[Memmert UM 400|Memmert oven]]'s limits (only fits diagonally) | |near the [[Memmert UM 400|Memmert oven]]'s limits (only fits diagonally) | ||
Revision as of 15:20, 20 February 2023
| ProjectInfoBox Plastic Beam Forming | |
|---|---|
| |
| Status: | experimenting stage |
| Initiator: | Massi |
| Materials Used: | various thermoplastics |
| Tools Used: | plastic shredder, drying oven |
Massi has begun experimenting with plastic beams made from self-shredded recycled plastic flakes.
Open Mold Method
To make beams without special machines, you can use a mold which is open on one of the long sides. Molten plastic is filled in and pressed into the mold with a matching "fourth side" piece.
- rough process
molten plastic in a baking pan
filling the mold with heat-resistant gloves
not ideal, but allows for longer molds: diagonal mold heating
[missing: shreds(?), pressing(?), finished beam]
| mold type | mold size | plastic type | plastic in [g] | temperature [°C] | duration | beam size | notes |
|---|---|---|---|---|---|---|---|
| welded steel | 50 × 4 × 2 cm | PP | 350 | 240 | approx. 2 h (?? min baking pan; ?? min mold) | 49 × ? × ? cm | near the Memmert oven's limits (only fits diagonally) |
