Project:Laptop Stand
From CoMakingSpace Wiki
Luzian wanted to have a laptop stand since he sits in front of his 13" laptop a few hours a day and looking down on its screen wasn't good for his posture.
V1
| ProjectInfoBox Laptop Stand V1 | |
|---|---|
| |
| Status: | finished |
| Release Date: | 4-2019 |
| Initiator: | Luzian |
| Materials Used: | MDF |
| Tools Used: | Laser Cutter |
| Software Used: | Fusion 360 |
| Approx. Cost: | <10$ |
Luzian actually wanted to mill it out of plywood on the CNC Router but then he just used the Laser cutter. The downside of laser cutting was having to clean up the burnt edges which - as you might know if you have used a laser cutter yourself - isn't a lot of fun.
Also, the angle in which the laptop is sitting is too steep and the catches are too small. Therefore the laptop falls off easily when you touch it.
The build is not ideal, but making it provided some important lessons which will be incorporated into future verions.
