Project:Dining Room Table: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) (Remove this from "Looking for Collaborators", which is linked on the main page) |
(moved photo to InfoBox) |
||
| Line 1: | Line 1: | ||
{{ProjectInfoBox | {{ProjectInfoBox | ||
|project title=Dining Room Table | |project title=Dining Room Table | ||
|image= | |image=Table.jpg | ||
|status=planning | |status=planning | ||
|date= | |date= | ||
| Line 11: | Line 11: | ||
|cost= | |cost= | ||
}} | }} | ||
== Plans == | == Plans == | ||
| Line 103: | Line 100: | ||
* https://www.instructables.com/id/Elegant-Dining-Table-on-a-Budget/ | * https://www.instructables.com/id/Elegant-Dining-Table-on-a-Budget/ | ||
[[Category:Furniture]] | |||
[[Category:Woodworking]] | [[Category:Woodworking]] | ||
Latest revision as of 23:20, 22 September 2022
| ProjectInfoBox Dining Room Table | |
|---|---|
| |
| Status: | planning |
| Initiator: | User:Biddlesby |
| Materials Used: | reclaimed wood |
Plans
I'm following the instructions here:
http://www.ana-white.com/2009/12/plans-farmhouse-table-knock-off-of.html
Tools
- Tape measure
- Square
- Hammer
- Drill
- Circular saw
- Sanding machine
- Paint brush
Materials
- Finish Oil 8
- Screws
- Wood Glue
- Sandpaper (pieces and for sanding machine)
I also need to find the following wood pieces. These dimensions are in inches: I intend to convert them to cm:
| Description | Quantity | Height (inches) | Width (inches) | Length (inches) |
|---|---|---|---|---|
| Tabletop Pieces | 7 | 2,0 | 6,0 | 81,0 |
| Outside Legs, Inside Legs, End Aprons | 10 | 2,0 | 4,0 | 28,5 |
| Bottom End Supports for the Stretcher | 2 | 2,0 | 4,0 | 34,5 |
| Stretcher, Side Aprons | 3 | 2,0 | 4,0 | 81,0 |
| Overhang Supports, Ends | 2 | 2,0 | 2,0 | 28,5 |
| Overhang Supports, Sides | 2 | 2,0 | 2,0 | 78,0 |
| Under Tabletop Supports | 10 | 2,0 | 2,0 | 28,5 |
| Breadboard Ends | 2 | 2,0 | 8,0 | 38,5 |
