Lathes: Difference between revisions
From CoMakingSpace Wiki
(basic machine anatomy) |
m (Category:Disambiguation instead of Machines) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
A lathe is the machine you need for [[turning]]: it spins the workpiece around a horizontal axis so that sharp semi-stationary tools can shape it by removing material. | A lathe is the [[machine]] you need for [[turning]] or [[woodturning]]: it spins the workpiece around a horizontal axis so that sharp semi-stationary tools can shape it by removing material. | ||
Workpieces are either held on both ends ("between centers") and supported by the motor-driven headstock (''Spindelstock'') and the passively rotating tailstock (''Reitstock''). The tailstock can be moved along the lathe bed as the length of the workpiece dictates. | Workpieces are either held on both ends ("between centers") and supported by the motor-driven headstock (''Spindelstock'') and the passively rotating tailstock (''Reitstock''). The tailstock can be moved along the lathe bed as the length of the workpiece dictates. | ||
We have | We have the following lathes at the CoMakingSpace: | ||
{{#ask: [[MachineType::~*Lathe*]] | |||
|?Has image | |||
|?MachineType | |||
|?Has caption | |||
|format=gallery | |||
|limit=50 | |||
|offset=0 | |||
|link=all | |||
|sort=MachineType | |||
|order=asc | |||
|headers=show | |||
|searchlabel=... further results | |||
|class=sortable wikitable smwtable | |||
|navigation=nav | |||
|autocaptions=1 | |||
|captionproperty=MachineType | |||
|imageproperty=Has image | |||
|redirects=MachineType | |||
}} | |||
== Morse Taper == | == Morse Taper == | ||
Many lathes have tailstocks with Morse taper fittings - a quick-change conical connection that provides very good holding force by its large surface contact area. <sup>[https://en.wikipedia.org/wiki/Machine_taper]</sup> | Many lathes have tailstocks with Morse taper fittings - a quick-change conical connection that provides very good holding force by its large surface contact area. <sup>[https://en.wikipedia.org/wiki/Machine_taper]</sup> | ||
| Line 13: | Line 29: | ||
[[Category: | [[Category:Disambiguation]] | ||
[[Category:Metalworking]] | [[Category:Metalworking]] | ||
[[Category:Turning]] | [[Category:Turning]] | ||
[[Category: | [[Category:Woodturning]] | ||
Latest revision as of 12:22, 9 April 2023
A lathe is the machine you need for turning or woodturning: it spins the workpiece around a horizontal axis so that sharp semi-stationary tools can shape it by removing material.
Workpieces are either held on both ends ("between centers") and supported by the motor-driven headstock (Spindelstock) and the passively rotating tailstock (Reitstock). The tailstock can be moved along the lathe bed as the length of the workpiece dictates.
We have the following lathes at the CoMakingSpace:
Morse Taper
Many lathes have tailstocks with Morse taper fittings - a quick-change conical connection that provides very good holding force by its large surface contact area. [1]
Drill chucks and collets are among the accessories one could mount using this taper.
