Circular Saw Blades: Difference between revisions
(cleaning) |
m (Text replacement - "[[Circular Saw|circular" to "[[Handheld Circular Saw|handheld circular") |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Circular saw blades (''Kreissägeblätter'') are used with various power [[saws]] such as [[Table Saw|table saw]], [[Chop Saw|chop saw]] and - you guessed it - the [[Circular Saw|circular saw]]. They cut by means of a high speed rotation. | Circular saw blades (''Kreissägeblätter'') are used with various power [[saws]] such as [[Table Saw|table saw]], [[Chop Saw|chop saw]] and - you guessed it - the [[Handheld Circular Saw|handheld circular saw]]. They cut by means of a high speed rotation. | ||
Depending on your material, the number and shape of teeth will greatly influence the cut quality. The diameters of the blade (OD) and the central bore (ID) are dictated by the | Depending on your material, the number and shape of teeth will greatly influence the cut quality. For example, teeth for [[aluminum]] are trapezoid in shape and many wood blades have alternating teeth with a tip on either side.<sup> [https://makerspace.experimenta.science/2021/06/02/kreissaegeblaetter-und-aluminium/]</sup> | ||
Chop saw blades have a different (steeper, often negative) tooth angle and should not be mixed up with those for handheld circular saws or table saws! | |||
The correct diameters of the blade (OD) and the central bore (ID) are dictated by the machine. | |||
== Cleaning == | == Cleaning == | ||
| Line 13: | Line 17: | ||
File:sawblade cleaning 5.JPG|5) done! | File:sawblade cleaning 5.JPG|5) done! | ||
</gallery> | </gallery> | ||
Alternatively, you could try soaking the blade in acetone or vinegar and scrubbing it with a [[Wire Brush|wire brush]]. | |||
Dull or dirty blades are more dangerous than properly maintained ones - please remove and [[management|report]] the blade in case this cleaning procedure did '''not''' help and it still seems dull! | Dull or dirty blades are more dangerous than properly maintained ones - please remove and [[management|report]] the blade in case this cleaning procedure did '''not''' help and it still seems dull! | ||
''Also see: [http://www.instructables.com/id/How-to-Clean-a-Table-Saw-Blade/ instructable about blade cleaning] - using laundry detergent'' | |||
== Further Reading == | == Further Reading == | ||
Latest revision as of 10:22, 20 September 2022
Circular saw blades (Kreissägeblätter) are used with various power saws such as table saw, chop saw and - you guessed it - the handheld circular saw. They cut by means of a high speed rotation.
Depending on your material, the number and shape of teeth will greatly influence the cut quality. For example, teeth for aluminum are trapezoid in shape and many wood blades have alternating teeth with a tip on either side. [1]
Chop saw blades have a different (steeper, often negative) tooth angle and should not be mixed up with those for handheld circular saws or table saws!
The correct diameters of the blade (OD) and the central bore (ID) are dictated by the machine.
Cleaning
Over time, the blades will get dirty and "gunked up" - this reduces their cutting ability, almost as if they were dull! Luckily, you can easily clean them with common household items (or terpentine for really bad cases):
1) prepare an appropriately sized dish with (hot) water and cleaning agent
2) let the blade soak for a while
3) scrub off the gunk with the rough side of a sponge
4) clean the tooth faces with something narrow but stable, e.g. a thin strip of scrap wood
5) done!
Alternatively, you could try soaking the blade in acetone or vinegar and scrubbing it with a wire brush.
Dull or dirty blades are more dangerous than properly maintained ones - please remove and report the blade in case this cleaning procedure did not help and it still seems dull!
Also see: instructable about blade cleaning - using laundry detergent
Further Reading
- Makezine: "Understanding Saw Blade Essentials"
