Project:Laptop Stand
From CoMakingSpace Wiki
Luzian wanted to have a laptop stand since he sits in front of my 13" laptop a few hours a day and looking down on it's screen wasn't good for his posture.
V1
| ProjectInfoBox Laptop Stand V1 | |
|---|---|
| |
| Status: | finished |
| Release Date: | 4-2019 |
| Initiator: | Luzian |
| Materials Used: | MDF |
| Tools Used: | Laser Cutter |
| Software Used: | Fusion 360 |
| Approx. Cost: | <10$ |
Luzian actually wanted to mill it out of plywood on the CNC Router but then he just used the Laser cutter. The downside of laser cutting was having to clean up the burnt edges which as you might know if you used a laser cutter your self is'n a lot of fun.
Also the angel in which the laptop is sitting is to steep and the catches are too small. Therefore the laptop falls of easily when you touch it.
The built is not ideal, but it making it provided some important lessons which will be incorporated into future verions.
