Vertical Bandsaws
We just got two bandsaws from our awesome members! While we're finding good spots and are learning how to use them, this page will become more detailed.
There is a larger bandsaw for wood and a smaller one for metal.
Interesting Resources
- "Arbeiten mit Bandsägen" slideshow (DE)
- Sicheres Arbeiten an Tischbandsägemaschinen (DE)
- Arbeitsschutz kompakt Nr. 039 "Arbeiten an Bandsägemaschinen" (DE)
- Arbeitsschutz kompakt Nr. 039 "Arbeiten an Metallbandsägen" (DE)
- Bandsäge richtig einstellen (DE)
Metabo BS 1638 W
| ToolInfoBox Metabo BS 1638 W | |
|---|---|
| |
| Synonyms: | "Bandsäge" |
| Material: | wood |
| Used with: | 2225 mm bandsaw blades |
| Location: | wood workshop |
| Access Requirements: | not yet possible (see #49) soon upon personal introduction |
| Manual: | identical(?): Metabo BAS 380 (libble.de) |
The Metabo BS 1638 W (you can probably drop the "W" when searching for accessories) is a three-wheeled bandsaw for 2225 mm bandsaw blades. This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | pending |
| Find the manual as PDF | needed for all machines - add a link to the InfoBox or comment where you could not find it | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | - | pending |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
CMI C-S-BS 250
| ToolInfoBox CMI C-S-BS 250 | |
|---|---|
| |
| Synonyms: | CMI C-BAN-250 (probably the same) |
| Material: | wood, metal (depending on blade) |
| Used with: | 1400 mm bandsaw blades |
| Location: | (soon) metal workshop |
| Access Requirements: | not yet possible (see #52) soon upon personal introduction |
| Manual: | nearly identical: Westfalia RBS 205 |
| Similar (More or Less): | scroll saw |
This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | done |
| Find the manual as PDF | needed for all machines - add a link to the InfoBox or comment where you could not find it | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | - | pending |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
This small bandsaw does not have much power, but is nice for learning the basics and in case you just need to make some curvy cuts through thin workpieces.
We might put it in the metal workshop once it is ready to use, a metal sawblade is on its way and there is an unknown one that came with the machine.
The blade guides are very simple, just consisting of two pins for the sides and a bearing for the back of the blade.
Specs:
- blade length - 1400 mm
- max. blade with - ???
- max. blade thickness - 0.36 mm [1]
- max. cutting depth - 80 mm
