D/T FeatherBoard (Feather Comb) M‑1407
From CoMakingSpace Wiki
Accessory: FeatherBoard
| ToolInfoBox D/T FeatherBoard (Feather Comb) M‑1407 | |
|---|---|
| |
| Synonyms: | Federklemme |
| Status: | available |
| Material: | wood |
| Used with: | Router Table, Table Saw |
Available as of July 2025 – the Milescraft Dual/Tandem FeatherBoard (M‑1407) is now part of our equipment lineup. Designed for use in the T-slots of our Router Table, this 2‑in‑1 device enhances safety and precision.
🛠 Description & Use-Cases
A versatile feather board that can be used:
- As two separate units for clamping small or narrow workpieces.
- Stacked with spacer for holding taller or wider stock securely
📏 Technical Data
- Length: approx. 200 mm
- Adjustment range: ~130 mm
- Includes both 5/8″ and 3/4″ guide/miter bars and T-slot bolts, compatible with our router table and table saw rails
✅ Features & Benefits
- Flat tension design enables consistent, reliable feed pressure and substantially reduces kick-back risk.
- Ergonomic knobs allow quick, secure clamping and easy adjustment.
- Two-in-one functionality: separate units or tandem with spacer — ideal for diverse workpiece sizes
📦 Included Scope
- 2 × FeatherBoard units
- 1 × Spacer for tandem use
- 4 × T-slot locking screws
- 2 × 5/8″ guide bars
- 2 × 3/4″ guide bars
- 2 x long screws for tandem use in u-profile
- 4 x short screws for single use in u-profiles
- 4 x black short screws for tandem use (SAFETY FEATURE)
⚠️ Safety & Use Instructions
- Mount boards so that “fingers” apply light to firm pressure on the workpiece before it enters the bit.
- Adjust spacing and pressure for smooth movement without pinching.
- Always verify secure attachment of guide bars and fasteners.
- Video: https://www.youtube.com/watch?v=yRG09xmT12I
📦 Storage
Store the FeatherBoard, spacer, guide bars, and mounting screws in the *no storage defined yet* next to the Router Table. Please return everything after use.
