Project:Plastic Beam Forming
From CoMakingSpace Wiki
| ProjectInfoBox Plastic Beam Forming | |
|---|---|
| |
| Status: | experimenting stage |
| Initiator: | Massi |
| Materials Used: | various thermoplastics |
| Tools Used: | plastic shredder, drying oven |
Massi has begun experimenting with plastic beams made from self-shredded recycled plastic flakes.
Open Mold Method
To make beams without special machines, you can use a mold which is open on one of the long sides. Molten plastic is filled in and pressed into the mold with a matching "fourth side" piece.
- rough process
molten plastic in a baking pan
filling the mold with heat-resistant gloves
not ideal, but allows for longer molds: diagonal mold heating
[missing: shreds(?), pressing(?), finished beam]
| mold type | mold size | plastic type | plastic in [g] | temperature [°C] | duration | beam size | notes |
|---|---|---|---|---|---|---|---|
| welded steel | 50 × ? × ? cm | PP | ?? | 240 | ?? min baking pan; ?? min mold | 49 × ? × ? cm | near the Memmert oven's limits (only fits diagonally) |
