Rotary Tool Introduction
From CoMakingSpace Wiki
This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!
This is the content required for an introduction to our rotary tool - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
Let's begin! First off, make sure you have read the machine's manual, if available (should be linked from its InfoBox).
Safety
Dangers
- generation of hot sparks that are expelled in varying directions
- sparks fly very far and deposit themselves as fine dust
- the workpiece heats up and stays hot for a while
- has no prevention of turning on after loss & restoration of power (keine Anlaufsicherung)
- metal dust can be a health hazard when inhaled
- aluminum can clog an abrasive disc and cause it to overheat until it breaks
Precautions
- wear goggles to protect your eyes
- wear ear defenders if its too loud normally you don't need them
- wear a proper dust mask when working with a rotary tool
- wear suitable gloves to prevent burns from sparks or the workpiece
- put the workpiece in a vise or clamp it down during grinding
- if the power has been lost for whatever reason, always return the power button to the "off" position before restoring it!
- be prepared for kickback
- do not attempt to vacuum up sparks! The dust collection bag could catch fire
- do not use abrasive discs on aluminum