Dowel Centers: Difference between revisions
From CoMakingSpace Wiki
("how to use" photo) |
m (Location:: for SMW) |
||
| Line 3: | Line 3: | ||
|image=dowel centers.JPG | |image=dowel centers.JPG | ||
|synonyms=DE: Dübelmarkierer, "Dübelfix" | |synonyms=DE: Dübelmarkierer, "Dübelfix" | ||
|type=marking tool | |type=[[marking]] tool | ||
|access= | |access=read this page | ||
|location=[[Wood Workshop|wood workshop]] | |location=above [[Location::Drilling Table|drilling table]]<br>([[Location::Wood Workshop|wood workshop]]) | ||
|material=[[wood]], [[dowels]] | |material=[[wood]], [[dowels]] | ||
|used with=[[drill]]; [[hammer]] or [[mallet]] | |used with=[[drill]]; [[hammer]] or [[mallet]] | ||
Revision as of 20:29, 25 June 2019
| ToolInfoBox Dowel Centers | |
|---|---|
| |
| Synonyms: | DE: Dübelmarkierer, "Dübelfix" |
| Type: | marking tool |
| Material: | wood, dowels |
| Used with: | drill; hammer or mallet |
| Location: | above drilling table (wood workshop) |
| Access Requirements: | read this page |
Dowel centers are inserted into the dowel holes in one of the two pieces to be joined, which is then pressed (or hammered, if necessary) against the location of the designated joint on the other piece. The marks they leave behind show you where to drill and save you a lot of measuring and swearing!
We have a set of four 8 mm dowel centers.
