Screwdriver Bits: Difference between revisions

From CoMakingSpace Wiki

(better photo, list hidden until updated)
(→‎1/4" Hex Drive Bits: updated list)
Line 14: Line 14:


== 1/4" Hex Drive Bits ==
== 1/4" Hex Drive Bits ==
These are the "typical" screwdriver bits you probably know from your own toolbox. The list below mostly contains the ones from the "grey bit set" - quantities may not interest you, but here you can quickly check whether a special drive is available or whether you should bring (or [[donate]]) that bit yourself!
These are the "typical" screwdriver bits you probably know from your own toolbox. The list below shows which ones you ''should'' be able to find in the Space - quantities may not interest you, but here you can quickly check whether a certain drive is available or whether you should bring (or [[donate]]) that bit yourself!


''The list is currently out of date but will be back soon :-)''
<!--
{| class="wikitable sortable"
{| class="wikitable sortable"
|-
|-
Line 24: Line 22:
! scope="col"| Screw Type
! scope="col"| Screw Type
! scope="col"| Quantity
! scope="col"| Quantity
|-
! scope="row"| PH0
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 3x short
|-
|-
! scope="row"| PH1
! scope="row"| PH1
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| Phillips
| 3x short, 2x long
| 2x short
|-
|-
! scope="row"| PH2
! scope="row"| PH2
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| Phillips
| 2x short
| 4x short
|-
|-
! scope="row"| PH3
! scope="row"| PH3
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| Phillips
| 7x short, 2x long
| 2x short
|-
|-
! scope="row"| PZ0
! scope="row"| PZ0
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| Pozidriv
| 3x short
| 1x short
|-
|-
! scope="row"| PZ1
! scope="row"| PZ1
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| Pozidriv
| 4x short
| 2x short
|-
|-
! scope="row"| PZ2
! scope="row"| PZ2
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| Pozidriv
| 10x short, 1x long
| 4x short
|-
|-
! scope="row"| PZ3
! scope="row"| PZ3
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| Pozidriv
| 2x short, 1x long
| 2x short
|-
|-
! scope="row"| 3 mm
! scope="row"| 3 mm
Line 73: Line 66:
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| slotted
| 1x short, 1x long
| 1x short
|-
|-
! scope="row"| 4.5 mm
! scope="row"| 4.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| slotted
| 2x short
| 1x short
|-
|-
! scope="row"| 5 mm
! scope="row"| 5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| slotted
| 1x short, 1x long
| 1x short
|-
|-
! scope="row"| 5.5 mm
! scope="row"| 5.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| slotted
| 2x short
| 1x short
|-
|-
! scope="row"| 6 mm
! scope="row"| 6 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| slotted
| 1x short, 1x long
| 1x short
|-
|-
! scope="row"| 6.5 mm
! scope="row"| 6.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| slotted
| 2x short
| 1x short
|-
|-
! scope="row"| 7 mm
! scope="row"| 7 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| slotted
| 1x short, 1x long
| 1x short
|-
|-
! scope="row"| 8 mm
! scope="row"| 8 mm
Line 118: Line 111:
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| Torx
| 2x short, 1x long
| 2x short
|-
|-
! scope="row"| T15
! scope="row"| T15
Line 128: Line 121:
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| Torx
| 2x short, 1x long
| 2x short
|-
|-
! scope="row"| T25
! scope="row"| T25
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| Torx
| 2x short
| 3x short
|-
|-
! scope="row"| T27
! scope="row"| T27
Line 143: Line 136:
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| Torx
| 2x short, 1x long
| 2x short
|-
|-
! scope="row"| T40
! scope="row"| T40
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| Torx
| 2x short
|-
! scope="row"| T45
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 1x short
|-
! scope="row"| T8H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T10H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T15H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T25H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T27H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T30H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T35H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T40H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| 1.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.59 mm (1/16")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.98 mm (5/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
| 1x short
|-
|-
! scope="row"| 2 mm
! scope="row"| 2 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.4 mm (3/32")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.8 mm (7/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| hex socket
Line 231: Line 149:
|-
|-
! scope="row"| 3 mm
! scope="row"| 3 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 3.2 mm (1/8")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 3.6 mm (9/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| hex socket
Line 246: Line 154:
|-
|-
! scope="row"| 4 mm
! scope="row"| 4 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 3x short, 1x long
|-
! scope="row"| 4.8 mm (3/16")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| hex socket
Line 256: Line 159:
|-
|-
! scope="row"| 5 mm
! scope="row"| 5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 2x short, 1x long
|-
! scope="row"| 5.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 5.6 mm (7/32")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| hex socket
Line 271: Line 164:
|-
|-
! scope="row"| 6 mm
! scope="row"| 6 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 2x short, 1x long
|-
! scope="row"| 6.4 mm (1/4")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| hex socket
Line 283: Line 171:
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| hex socket
| 1x short
|-
! scope="row"| 1.98 mm (5/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.4 mm (3/32")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.5 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.8 mm (7/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3.2 mm (1/8")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3.6 mm (9/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 4 mm (5/32")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 2x short
|-
! scope="row"| 5 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 6 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
| 1x short
|-
|-
Line 353: Line 186:
| [[File:Screw Head - Double Hex.svg|frameless|20px|center]]
| [[File:Screw Head - Double Hex.svg|frameless|20px|center]]
| Double Hex
| Double Hex
| 1x short
|-
! scope="row"| 6
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 8
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 10
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 0
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 4
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 4
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 6
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 8
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 10
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
| 1x short
|}
|}
-->


=== Bit Holders ===
=== Bit Holders ===

Revision as of 17:22, 6 November 2018

ToolInfoBox

Screwdriver Bits

Screwdriver bit organizers.JPG
Synonyms: DE: Schraubeinsätze, Schrauberbits
Type: bit
Material: screws
Location: above drilling table
Access Requirements: upon reading
our set of bits for typical wood screws

Screwdriver bits are interchangeable tips for hex bit screwdrivers. You can use them with a cordless drill but not with the drill press as this applies way too much torque and speed! The cordless drill should always be used with medium to low torque setting and a low speed (1st gear) at least at the beginning.

When mounting long bits (or short bits with a bit holder) into a chuck, make sure that the chuck teeth are centered on the flat sides of the bit when tightened or you will lose or damage the bit.

1/4" Hex Drive Bits

These are the "typical" screwdriver bits you probably know from your own toolbox. The list below shows which ones you should be able to find in the Space - quantities may not interest you, but here you can quickly check whether a certain drive is available or whether you should bring (or donate) that bit yourself!

Size Screw Symbol Screw Type Quantity
PH1
Screw Head - Phillips.svg
 Phillips 2x short
PH2
Screw Head - Phillips.svg
 Phillips 4x short
PH3
Screw Head - Phillips.svg
 Phillips 2x short
PZ0
Screw Head - Pozidrive.svg
 Pozidriv 1x short
PZ1
Screw Head - Pozidrive.svg
 Pozidriv 2x short
PZ2
Screw Head - Pozidrive.svg
 Pozidriv 4x short
PZ3
Screw Head - Pozidrive.svg
 Pozidriv 2x short
3 mm
Screw Head - Slotted.svg
 slotted 1x short
4 mm
Screw Head - Slotted.svg
 slotted 1x short
4.5 mm
Screw Head - Slotted.svg
 slotted 1x short
5 mm
Screw Head - Slotted.svg
 slotted 1x short
5.5 mm
Screw Head - Slotted.svg
 slotted 1x short
6 mm
Screw Head - Slotted.svg
 slotted 1x short
6.5 mm
Screw Head - Slotted.svg
 slotted 1x short
7 mm
Screw Head - Slotted.svg
 slotted 1x short
8 mm
Screw Head - Slotted.svg
 slotted 1x short
T8
Screw Head - Torx.svg
 Torx 1x short
T10
Screw Head - Torx.svg
 Torx 2x short
T15
Screw Head - Torx.svg
 Torx 2x short
T20
Screw Head - Torx.svg
 Torx 2x short
T25
Screw Head - Torx.svg
 Torx 3x short
T27
Screw Head - Torx.svg
 Torx 1x short
T30
Screw Head - Torx.svg
 Torx 2x short
T40
Screw Head - Torx.svg
 Torx 1x short
2 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
3 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
4 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
5 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
6 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
8 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
5 mm
Screw Head - Double Hex.svg
 Double Hex 1x short
6 mm
Screw Head - Double Hex.svg
 Double Hex 1x short
8 mm
Screw Head - Double Hex.svg
 Double Hex 1x short

Bit Holders

Bit holders (DE: Bithalter) are necessary to mount short-shaft bits into a power driver such as a cordless drill but may also add functionality to a handheld bit screwdriver. For instance, there are quick-release holders, such with a strong magnet for one-handed operation, and simple extension pieces without any extras.

Retrieved from "https://wiki.comakingspace.de/index.php?title=Screwdriver_Bits&oldid=4714"