Project:Door Panel Storage Solution for VW T5: Difference between revisions

Latest revision as of 15:43, 12 February 2025

Door Panel Storage for a Van

This project involves designing and constructing custom storage compartments for the side and door panels of a van. The storage compartments are made from 4 mm beech plywood and are precisely cut using a laser cutter. The design process is carried out in Onshape, utilizing features like Laser Joint and Auto Layout for efficient and accurate CAD modeling. The assembly is achieved using finger joints (laser joint) for a sturdy and seamless fit.

ProjectInfoBox Door Panel Storage for a Van

Status:	finished
Release Date:	10/2024
Initiator:	Tom
Materials Used:	4 mm beech plywood
Tools Used:	Lasercutter
Software Used:	Onshape, CutListOptimizer.com
Approx. Cost:	11€ per sheet of plywood (2 sheets)

Assembly using wood glue (PU glue might be better suited as it is less brittle to withstands vibration and fill cleaves)

For installation the original panels and holders were used

@@ Line 1: / Line 1: @@
 '''Door Panel Storage for a Van'''
-This project involves designing and constructing custom storage compartments for the side and door panels of a van. The storage compartments are made from 4 mm beech plywood and are precisely cut using a laser cutter. The design process is carried out in Onshape, utilizing features like Laser Joint and Auto Layout for efficient and accurate CAD modeling. The assembly is achieved using finger joints (Laser Joint) for a sturdy and seamless fit.
+This project involves designing and constructing custom storage compartments for the side and door panels of a van. The storage compartments are made from 4 mm beech plywood and are precisely cut using a laser cutter. The design process is carried out in Onshape, utilizing features like Laser Joint and Auto Layout for efficient and accurate CAD modeling. The assembly is achieved using finger joints ([[Laser Joint|laser joint]]) for a sturdy and seamless fit.
 {{ProjectInfoBox