Project:Door Panel Storage Solution for VW T5

From CoMakingSpace Wiki

Door Panel Storage for a Van

This project involves designing and constructing custom storage compartments for the side and door panels of a van. The storage compartments are made from 4 mm beech plywood and are precisely cut using a laser cutter. The design process is carried out in Onshape, utilizing features like Laser Joint and Auto Layout for efficient and accurate CAD modeling. The assembly is achieved using finger joints (Laser Joint) for a sturdy and seamless fit.

ProjectInfoBox

Door Panel Storage for a Van

[[Has image::File:Sidepanel.jpg|frameless|300px]]
Status: finished
Release Date: 10/2024
Initiator: Tom
Materials Used: 4mm beech Plywood
Tools Used: Lasercutter
Software Used: Onshape, https://www.cutlistoptimizer.com/
Approx. Cost: 11€ per Sheet of Plywood (2 Sheets)


Onshape CAD drawing using Laserjoint and Autolayout. Sanding before assembly Assembly using wood glue (PU glue might be better suited as it is less brittle to withstands vibration and fill cleaves) Rear view of the panel Sidepanel and sliding door panel. A rubber gasket was applied for protection For installation the original panels and holders were used Sliding door panel

Retrieved from "https://wiki.comakingspace.de/index.php?title=Project:Door_Panel_Storage_Solution_for_VW_T5&oldid=18456"