CNC Router Introduction

This is the content required for an introduction to our CNC_Router - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

Let's begin! First off, make sure you have read the machine's manual, if available (check its "InfoBox" in the wiki for instructions how to find it).

Safety

Dangers

• fast spinning bits

Precautions

• wear personal protection
• stay clear of the CNC Router when in operation
• unplug the Router when changing a bit or touching the chuck for any other reason
• monitor the CNC Router closely when in operation. Push the emergency shutdown if anything goes wrong.

Suggested Reading

Besides these safety notes, you should read about the different Bits to know what you're doing! Different materials usually require different bits, and the drilling speed depends on the bit as well as the type of material.

Demonstration

The tutor will show you these steps in detail:

• Selecting the right bit
• inserting a bit