Network

From a physical perspective, the network at the CoMakingSpace is built up as follows:

graph LR subgraph lan [LAN] A[CommonRoom Fritz!Box] --> B[E-Room Access Point] A --> H[Office Router] A --> I[HomeAssistant] A --> J[Wood Workshop Access Point] click A "http://fritz.box" _blank click I "http://homeassistant.local:8123" _blank end subgraph eroom [E-Room-LAN] B --> WCNC1(Workbee CNC) click WCNC1 "https://workbeecnc.fritz.box" _blank B --> WCNC2(Workbee CNC Tablet) end subgraph wlan [WLAN] A -.-> D(Laser PC) A -.-> E(Slicing PC) A -.-> F(P7) A -.-> G(P8) A -.-> K(Wifi-Brücke) K --> M(LaserJet) A -.-> L(prusa-link) B --> O epilog legend 36ext end style wlan fill:#6dc8fc

The main Fritz!Box provides IPs within the 10.0.0.0/8

The DHCP Server provides dynamic IP adresses for clients in the range 10.100.0.0 - 10.100.255.255

All other IP Adresses are static adresses and listed below

Network Infrastructure

Device	IP
Common Room Fritz!Box	10.0.0.1
Office Fritz!Box	10.0.0.2
Wood Workshop Access Point	10.0.0.3
E-Room Access Point	none

IoT-related devices

Device	IP
Homeassistant	10.1.0.1
Buzzer - Common Room to Workshop
Buzzer - Common Room to E-Room
Buzzer - Common Room to Storage
Buzzer - E-Room to Workshop
Buzzer - Workshop to E-Room
Shelly - RouterTable (COMS00154)	10.1.0.6
Shelly - Felder AF 14 (COMS00073)	10.1.0.7
Shelly - Festool CTM26 E AC (COMS00021) (Chip)	10.1.0.8
Shelly - Record Power AC400 (COMS00159)	10.1.0.9
Shelly - Record Power AC400 (COMS00158)	10.1.0.10

Machines

Device	IP
Laser PC	10.2.0.1
Slicing PC	10.2.0.2
Workbee CNC Router	10.2.0.3
Workbee CNC Tablet	10.2.0.4
BambuLab (P7)	10.2.0.5
BambuLab (P8)	10.2.0.6
LaserJet Laser Printer	10.2.0.7
prusa-link	10.2.0.8
epilog legend 36ext	10.2.0.9

Configuration Changes

If you need to change settings for the FritzBox Router (providing the CoMakingSpace network) or any of the Raspberry Pis, please contact Martin.