Dowel Centers: Difference between revisions
From CoMakingSpace Wiki
m (also sold as "Dübelfix") |
m (updated links) |
||
| Line 5: | Line 5: | ||
|type=marking tool | |type=marking tool | ||
|access= | |access= | ||
|location= | |location=[[Wood Workshop|wood workshop]] | ||
|material=[[wood]], [[ | |material=[[wood]], [[dowels]] | ||
| | |used with=[[drill]]; [[hammer]] or [[mallet]] | ||
}} | }} | ||
Dowel centers are inserted into the [[ | Dowel centers are inserted into the [[dowel]] holes in one of the two pieces to be joined, which is then pressed (or hammered) against the location of the designated joint on the other piece. The marks they leave behind show you where to [[Wood Drill Bits|drill]]! | ||
We have a set of four 8 mm dowel centers. | We have a set of four 8 mm dowel centers. | ||
Revision as of 12:27, 18 September 2017
| ToolInfoBox Dowel Centers | |
|---|---|
| |
| Synonyms: | DE: Dübelmarkierer, "Dübelfix" |
| Type: | marking tool |
| Material: | wood, dowels |
| Used with: | drill; hammer or mallet |
| Location: | wood workshop |
Dowel centers are inserted into the dowel holes in one of the two pieces to be joined, which is then pressed (or hammered) against the location of the designated joint on the other piece. The marks they leave behind show you where to drill!
We have a set of four 8 mm dowel centers.
