KSGER T12 V2.1: Difference between revisions
From CoMakingSpace Wiki
(Created page with "== KSGER T12 V2.1 == {{MachineInfoBox |machine name=KSGER T12 |synonyms=DE: Lötkolben |type=Soldering Iron |image=KSGER_T12_soldering_station.jpeg |location=electronics room |access=soldering iron introduction |material=solder |tutors=Patrick |similar=hot air soldering station |extrabox=yes }} The KSGER soldering station used the T12 heating cartridg...") |
(break) |
||
| Line 17: | Line 17: | ||
'''Note:''' During first heat up the station may show an error, but it should go away once it is at the desired temperature. | '''Note:''' During first heat up the station may show an error, but it should go away once it is at the desired temperature. | ||
<br clear=all> | |||
Revision as of 18:28, 28 September 2022
KSGER T12 V2.1
| MachineInfoBox KSGER T12 | |
|---|---|
| |
| Synonyms: | DE: Lötkolben |
| Material: | solder |
| Access Requirements: | Soldering Iron Introduction |
| Tutors: | Lukas NitramLegov Pakue Mitja Johannes Luzian Leo |
| Similar (More or Less): | hot air soldering station |
The KSGER soldering station used the T12 heating cartridges from Hakko (or their aftermarket copies). These are directly heated with an integrated temperature sensor and are therefore faster to heat up.
Note: During first heat up the station may show an error, but it should go away once it is at the desired temperature.
