Project:Laser Engraved Stamps

ProjectInfoBox Laser made Stamps
Status:	done
Initiator:	Luzian
Team:	Martin, Patrick

As a preparation for the Türöffnertag 2021, Luzian had the idea to let the kids create custom stamps with our Laser Cutter.

Material

The Stamps are made of special Laser Rubber. The holders can either be 3D printed with a custom design created by Patrick or be made our of wood

Designing the Stamp

In order to enable the kids to design their own stamps, we have created a template where they can draw the design on:

This template can be printed and - after designing the stamp - scanned.

Preparing the image

After scanning the template with the stamp design, it needs to be prepared for the Laser Cutter. For this, 3 steps are needed:

1. convert it into a 2-bit image (the laser can only produce black or white. no grey-scales are possible.
2. invert the colors
3. horizontally mirror the image

Laser the stamp and test it

The last step follows the regular preparations for engraving pictures with the laser cutter. The needed settings can be found on Laser Cutter Material Settings.