Dowel Centers: Difference between revisions
From CoMakingSpace Wiki
("how to use" photo) |
NitramLegov (talk | contribs) m (German) |
||
| (4 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{ToolInfoBox | {{ToolInfoBox | ||
|tool name=Dowel Centers | |tool name=Dowel Centers | ||
|image=dowel centers.JPG | |german=Dübelmarkierer|image=dowel centers.JPG | ||
|synonyms=DE: Dübelmarkierer, " | |synonyms=DE: Dübelmarkierer, Dübelspitzen,<br>Dübelhütchen, "Dübelfixe" | ||
|type=marking tool | |type=[[marking]] tool | ||
|access= | |access=read this page | ||
|location=[[Wood Workshop|wood workshop]] | |location=above [[Location::Drilling Table|drilling table]]<br>([[Location::Wood Workshop|wood workshop]]) | ||
|material=[[wood]], [[dowels]] | |material=[[wood]], [[dowels]] | ||
|used with=[[drill]]; [[hammer]] or [[mallet]] | |used with=[[drill]]; [[hammer]] or [[mallet]] | ||
|similar=[[Doweling Jigs|doweling jigs]] | |||
}} | }} | ||
Dowel centers are inserted into the [[dowel]] holes in one of the two pieces to be joined, which is then pressed (or [[hammer]]ed, if necessary) against the location of the designated joint on the other piece. The marks they leave behind show you where to [[Wood Drill Bits|drill]] and save you a lot of measuring and swearing! | Dowel centers are inserted into the [[dowel]] holes in one of the two pieces to be joined, which is then pressed (or [[hammer]]ed, if necessary) against the location of the designated joint on the other piece. The marks they leave behind show you where to [[Wood Drill Bits|drill]] and save you a lot of measuring and swearing! | ||
We have a set of four 8 mm dowel centers. | We have a set of four 8 mm dowel centers and ''a few single ones in other diameters''. | ||
[[File:Resized wardrobe drawers 11.JPG|left|thumb|the centers are inserted into a drilled piece, then pushed into the other one where they leave marks telling you where to drill next]] | [[File:Resized wardrobe drawers 11.JPG|left|thumb|the centers are inserted into a drilled piece, then pushed into the other one where they leave marks telling you where to drill next]] | ||
[[Category:Marking & Measuring]] | [[Category:Marking & Measuring]] | ||
[[Category:Woodworking]] | [[Category:Woodworking]] | ||
Latest revision as of 10:42, 2 May 2022
| ToolInfoBox Dowel Centers | |
|---|---|
| |
| Synonyms: | DE: Dübelmarkierer, Dübelspitzen, Dübelhütchen, "Dübelfixe" |
| Type: | marking tool |
| Material: | wood, dowels |
| Used with: | drill; hammer or mallet |
| Location: | above drilling table (wood workshop) |
| Access Requirements: | read this page |
| Similar (More or Less): | doweling jigs |
Dowel centers are inserted into the dowel holes in one of the two pieces to be joined, which is then pressed (or hammered, if necessary) against the location of the designated joint on the other piece. The marks they leave behind show you where to drill and save you a lot of measuring and swearing!
We have a set of four 8 mm dowel centers and a few single ones in other diameters.
