Category:Welding: Difference between revisions

Latest revision as of 10:56, 29 August 2022

Welding is basically the art of "gluing" metal with molten metal. One way to generate the required heat is to use an electric arc (arc welding), a very common approach with several variants:

SMAW (shielded metal arc welding/"stick welding")
TIG (tungsten inert gas) welding
MIG (metal inert gas) welding
...

General Safety

As you might expect from an activity including high electric current, extremely bright light and molten metal, welding comes with many dangers! Do your part so nothing bad will happen.

Personal Protection

When welding, always wear

properly shaded welding helmet
safety glasses for when the helmet is up
welding gloves
welding jacket
cotton clothing (you don't want synthetic fibers to melt on you!)
solid, closed shoes (hot sparks burn through the thin mesh on sneakers)

Suitable Materials

Not all metals can be welded, and some only with certain welding techniques! Your introduction by a tutor will cover the basics, but you may have to do some research yourself in case of more exotic metals.

In any case, do NOT weld galvanized steel! The zinc in the surface coating produces a highly unhealthy gas when burned.

Setup

Due to the smoke and less visible gases involved, we ask you to weld outside in our welding enclosure outside the metal workshop! The curtains will also prevent others from looking into the arc.

Project Ideas

Welding Projects by Lincoln Electric (few details, but lots of inspiration!)

Pages in category "Welding"

The following 8 pages are in this category, out of 8 total.

A

Arc Welding Introduction

S

W

@@ Line 15: / Line 15: @@
 * [[Welding Jackets|welding jacket]]
 * cotton clothing (you don't want synthetic fibers to melt on you!)
-* solid, closed shoes
+* solid, closed shoes (hot sparks burn through the thin mesh on sneakers)
 === Suitable Materials ===
-Not all metals can be welded, and some only with certain welding techniques! Your [[introduction]] by a tutor will cover the basics, but you may have to do some research yourself in case of more exotic metals.
+Not all metals can be welded, and some only with certain welding techniques! Your [[Welding Introduction|introduction by a tutor]] will cover the basics, but you may have to do some research yourself in case of more exotic metals.
 '''In any case, do NOT weld galvanized steel! The zinc in the surface coating produces a highly unhealthy gas when burned.'''
 === Setup ===
-Due to the smoke and less visible gases involved, we ask you to weld '''outside''' or at least within the open double doors of the [[Metal Workshop|metal workshop]]. Put up [[Welding Curtains|welding curtains]] around yourself so others can not look into the arc!
+Due to the smoke and less visible gases involved, we ask you to weld '''outside''' in our [[Welding Area|welding enclosure]] outside the [[Metal Workshop|metal workshop]]! The curtains will also prevent others from looking into the arc.
 === See Also ===
 * [https://www.youtube.com/watch?v=0MGF3p7FZBc video introduction to many welding risks and good practices]
 * [http://www.lincolnelectric.com/en-au/support/welding-solutions/Pages/Five-potential-welding-safety-hazards.aspx Lincoln Electric on welding safety]
+* [http://www.engelmann-schweisstechnik.de/service/fachwissen/items/elektrodenschweissen-mma ''Engelmann Schweißtechnik: Fachwissen (DE)''] - good summaries on safety and different techniques
+== Project Ideas ==
+* [https://www.lincolnelectric.com/en-us/support/welding-projects/Pages/welding-projects.aspx Welding Projects by Lincoln Electric] (few details, but lots of [[inspiration]]!)
 [[Category:Metalworking]]